Draft Edit/sv

From FreeCAD Documentation
Revision as of 23:05, 13 February 2014 by Yorik (talk | contribs) (Created page with "==Bruk==")

Template:GuiCommand/se

Beskrivning

Detta verktyg tillåter dig att grafiskt redigera vissa egenskaper av det markerade objektet, som hörnen i en tråd, eller längden och bredden på en Rektangel, eller radien på en Cirkel.

File:Draft edit example.jpg

Bruk

  1. Select a wire, line, rectangle, bspline or circle
  2. Press the Draft Edit button, or double-click the object in the Tree panel, or use the Std Edit tool.
  3. Click on a point you wish to move
  4. Click another point on the 3D view, or type a coordinate
  5. Press ESC or the Finish button

Options

  • The Edit tool only works on one selected object at a time.
  • The Edit tool only works on Draft Wires, Rectangles, Circles and Arcs. Other object types must first be converted to Draft objects.
  • Click on an edit vertex to move it, click again to release it.
  • Press X, Y or Z after a point to constrain the next point on the given axis.
  • To enter coordinates manually, simply enter the numbers, then press ENTER between each X, Y and Z component.
  • Press CTRL while drawing to force snapping your point to the nearest snap location, independently of the distance.
  • Press SHIFT while drawing to constrain your next point horizontally or vertically in relation to the last one.
  • Press ESC or the Cancel button or the Draft Edit button again to finish editing.
  • Pressing the Add point button allows you to add points to Wires and BSplines by clicking on the segments
  • Pressing the Del point button allows you to remove points from Wires and BSplines by clicking on the points to remove

Scripting

Not available. Each of the above object can be modified by changing its properties directly.