Arch: Stairs/Scări

From FreeCAD Documentation
Revision as of 09:33, 4 December 2018 by Luc (talk | contribs)

Arch Stairs

Menu location
Arch → Stairs
Workbenches
Arch
Default shortcut
S R
Introduced in version
-
See also
None

Descriere

Instrumentul Scara vă permite să construiți automat mai multe tipuri de scări. În prezent, sunt suportate doar scările drepte (cu sau fără odihnă centrală). Scările pot fi construite de la zero sau dintr-o linie linie, caz în care scările urmează linia. Dacă linia nu este orizontală, dar are o înclinație verticală, scările vor urma și ele această pantă.

A se vedea Stairs entry in wikipedia pentru o definiție a diferitor termeni utilizați pentru a descrie piese/părți ale scărilor. (pentru linba română avem https://www.spatiulconstruit.ro/ghid-de-constructii/scari-notiuni-generale-clasificari/9 )

În imaginea de mai suse, două scări au fost create, una cu o structură masivă și o odihnă, alta cu un singur vang central.

Opţiuni

  • Scările partajează proprietățile și comportamentele comune tuturor Arch Components

Cum se folosește

  1. Apăsați butonul Arch Stairs button, sau apăsați testele S, R
  2. Adjust the desired properties. Some parts of the stairs, such as the structure, might not appear immediately, if any of the properties makes it impossible, such as a structure thickness of 0.

Proprietăți

Base

  • DateAlign: Alinerea acestor scări cu linia de bază, dacă se poate aplica.
  • DateBase: The baseline of these stairs, if any.
  • DateHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
  • DateLength: The total length of these stairs if no baseline is defined.
  • DateWidth: Lățimea acestor scări.

Steps

  • DateNosing: The size of the nosing.
  • DateNumber of Steps: The numbers of steps (risers) in these stairs.
  • DateRiser Height: The height of the risers.
  • DateTread Depth: The depth of the treads.
  • DateTread Thickness: The thickness of the treads.

Structure

  • DateLandings: The type of landings.
  • DateStringer Offset: The offset between the border of the stairs and the structure.
  • DateStringer Width: The width of the stringers.
  • DateStructure: The type of structure of these stairs.
  • DateStructure Thickness: The thickness of the structure.
  • DateWinders: The type of winders.

Scrip-Programare

Stairs pot fi creat din scripturi Python și macros utilizând urmăotarea funcție:

makeStairs([base], [length], [width], [height], [steps])
  • Creates a stairs object with the given attributes.
  • Returns the new stairs object.

Exempluː

import Arch
makeStairs(length=5, width=1.2, height=3, steps=14)

Limitări

  • Instrumetnul este disponibil de la versiunea FreeCAD 0.14 sau una mai recentă
  • Momentan sunt disponibile doar scări drepte
  • Consultați intrarea forumului forum entry pentru scări circulare.
  • A se vedea forum announcement..