Escadas

From FreeCAD Documentation
Revision as of 13:38, 8 July 2014 by Renatorivo (talk | contribs) (Created page with "Arch Stairs")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Arch Stairs

Menu location
Arch → Stairs
Workbenches
Arch
Default shortcut
S R
Introduced in version
-
See also
None

Description

The stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight line, in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope.

See the Stairs entry in wikipedia for a definition of the different terms used to describe parts of stairs.

On the above image, two stairs were created, one with a massive structure and a landing, and another one with a single stringer.

How to use

  1. Press the Arch Stairs button, or press S, R keys
  2. Adjust the desired properties. Some parts of the stairs, such as the structure, might not appear immediately, if any of the properties makes it impossible, such as a structure thickness of 0.

Properties

Base

  • DadosAlign: The alignment of these stairs on their baseline, if applicable.
  • DadosBase: The baseline of these stairs, if any.
  • DadosHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
  • DadosLength: The total length of these stairs if no baseline is defined.
  • DadosWidth: The width of these stairs.

Steps

  • DadosNosing: The size of the nosing.
  • DadosNumber of Steps: The numbers of steps (risers) in these stairs.
  • DadosRiser Height: The height of the risers.
  • DadosTread Depth: The depth of the treads.
  • DadosTread Thickness: The thickness of the treads.

Structure

  • DadosLandings: The type of landings.
  • DadosStringer Offset: The offset between the border of the stairs and the structure.
  • DadosStringer Width: The width of the stringers.
  • DadosStructure: The type of structure of these stairs.
  • DadosStructure Thickness: The thickness of the structure.
  • DadosWinders: The type of winders.

Scripting

Stairs can be created from python scripts and macros by using the following function:

 makeStairs([base], [length], [width], [height], [steps])
  • Creates a stairs object with the given attributes.
  • Returns the new stairs object.

Example:

 import Arch
 makeStairs(length=5, width=1.2, height=3, steps=14)

Limitations

  • Not available before FreeCAD version 0.14
  • Only straight stairs are available at the moment
  • See the forum entry for circle stairs.
  • See the forum announcement.