Borrador BezCurva
Borrador BezCurva |
Ubicación en el Menú |
---|
Dibujo → Herramientas Bézier → Curva Bézier |
Entornos de trabajo |
Borrador, Architectura |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
0.14 |
Ver también |
Borrador CubicBezCurva, Borrador BSpline |
Descripción
El Borrador BezCurva comando crea una Curva de Bézier a partir de varios puntos.
El comando crea una única curva de Bézier con una DatosDegree que es number_of_points - 1
. Se puede transformar en una curva Bézier a trozos reduciendo esta propiedad.
Los comandos Borrador CubicBezCurva utilizan puntos de control para definir la posición y la curvatura de la spline. El comando Borrador BSpline, en cambio, especifica los puntos exactos por los que pasará la curva
Curva de Bézier definida por múltiples puntos
Utilización
Ver también: Bandeja Borrador, Borrador Atrapar y Borrador Restricción.
- Hay varias formas de invocar el comando:
- Pulsar el Borrador BezCurve.
- Seleccione la opción Redacción → Herramientas Bézier → Curva de Bézier en el menú.
- Se abre el panel de tareas Curva de Bézier. Ver Opciones para más información.
- Escoge el primer punto en la Vista 3D, o escribe coordenadas y pulsa el Template:Botón botón.
- Escoge puntos adicionales en la Vista 3D, o escribe coordenadas y pulsa el File:Borrador AddPoint.svg Introducir punto botón.
- Pulse Esc o el botón Close para finalizar el comando.
Opciones
Los atajos de teclado de un solo carácter disponibles en el panel de tareas se pueden cambiar. Ver Preferencias de Borrador. Los atajos mencionados aquí son los atajos por defecto.
- Para introducir manualmente las coordenadas introduzca el componente X, Y y Z, y pulse Enter después de cada una. O puede pulsar el Introducir punto cuando tenga los valores deseados. Es aconsejable mover el puntero fuera de la Vista 3D antes de introducir las coordenadas.
- Pulse R o haga clic en la casilla Relative para activar el modo relativo. Si el modo relativo está activado, las coordenadas son relativas al último punto, si está disponible, sino son relativas al origen del sistema de coordenadas.
- Pulse G o haga clic en la casilla Global para activar el modo global. Si el modo global está activado, las coordenadas son relativas al sistema de coordenadas global, sino son relativas al sistema de coordenadas del Plano de trabajo. introducido en la versión 0.20
- Pulse L o haga clic en la casilla Relleno para activar el modo relleno. Si el modo de relleno está activado, la curva creada tendrá DatosHacer Cara establecido en
true
y tendrá una cara rellena, siempre y cuando esté cerrada y no se auto-intersecte. Tenga en cuenta que una curva que se auto-interseca con una cara no se mostrará correctamente, para tal curva DatosHacer Cara debe ser ajustado afalse
. - Pulse T o haga clic en la casilla Continuar para activar el modo de continuación. Si el modo de continuar está activado, el comando se reiniciará después de usar Terminar o Cerrar, o después de crear una curva cerrada ajustándose al primer punto de la curva, permitiéndole continuar creando curvas.
- Pulse el Deshacer para deshacer el último punto. El atajo de teclado Ctrl+Z actualmente no funciona.
- Pulse A o el botón Finalizar para terminar el comando y dejar la curva abierta.
- Pulse O o el botón Cerrar para terminar el comando y cerrar la curva. También se puede crear una curva cerrada ajustándose al primer punto de la curva.
- Pulse W o el botón Limpiar para borrar los segmentos ya colocados, pero seguir trabajando desde el último punto.
- Pulsar U o el Fijar PT para ajustar el plano de trabajo actual en la orientación definida por el último punto y el anterior.
- Pulse Esc o el botón Cerrar para finalizar el comando.
Notas
- Un Borrador de Curva de Bézier puede ser editado con el comando Borrador Edición.
- OpenCascade, y por tanto FreeCAD, no soporta curvas Bézier de grados superiores a 25. Esto no debería ser un problema en la práctica, ya que la mayoría de los usuarios suelen utilizar curvas Bézier de grados 3 a 5.
Propiedades
Ver también: Editor de propiedades.
Un objeto Draft BezCurva deriva de un Pieza2DObjeto y hereda todas sus propiedades. También tiene las siguientes propiedades adicionales:
Datos
Borrador
- DatosArea (
Area
): (read-only) specifies the area of the face of the curve. The value will be0.0
if DatosMake Face iffalse
or the face cannot be created. - DatosClosed (
Bool
): specifies if the curve is closed or not. If the curve is initially open this value isfalse
, setting it totrue
will draw a segment to close the curve. If the curve is initially closed this value istrue
, setting it tofalse
will remove the last segment and make the curve open. - DatosContinuity (
IntegerList
): (read-only) specifies the continuity of the curve. - DatosDegree (
Integer
): specifies the degree of the curve. - DatosLength (
Length
): (read-only) specifies the total length of the curve. - DatosMake Face (
Bool
): specifies if the curve makes a face or not. If it istrue
a face is created, otherwise only the perimeter is considered part of the object. This property only works if DatosClosed istrue
and if the curve does not self-intersect. - DatosPoints (
VectorList
): specifies the control points of the curve in its local coordinate system.
Vistas
Borrador
- VistaArrow Size (
Length
): specifies the size of the symbol displayed at the end of the curve. - VistaArrow Type (
Enumeration
): specifies the type of symbol displayed at the end of the curve, which can beDot
,Circle
,Arrow
,Tick
orTick-2
. - VistaEnd Arrow (
Bool
): specifies whether to show a symbol at the end of the curve, so it can be used as an annotation line. - VistaPattern (
Enumeration
): specifies the Draft Pattern with which to fill the face of the closed curve. This property only works if DatosMake Face istrue
and if VistaDisplay Mode isFlat Lines
. - VistaPattern Size (
Float
): specifies the size of the Draft Pattern.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To create a Draft Line use the make_bezcurve
method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeBezCurve
method.
bezcurve = make_bezcurve(pointslist, closed=False, placement=None, face=None, support=None, degree=None)
bezcurve = make_bezcurve(Part.Wire, closed=False, placement=None, face=None, support=None, degree=None)
- Creates a
bezcurve
object with the given list of points,pointslist
.- Each point in the list is defined by its
FreeCAD.Vector
, with units in millimeters. - Alternatively, the input can be a
Part.Wire
, from which points are extracted.
- Each point in the list is defined by its
- If
closed
isTrue
, or if the first and last points are identical, the curve is closed. - If
placement
isNone
the curve is created at the origin. - If
face
isTrue
, and the curve is closed, the curve will make a face, that is, it will appear filled.
Ejemplo:
import FreeCAD as App
import Draft
doc = App.newDocument()
p1 = App.Vector(0, 0, 0)
p2 = App.Vector(1000, 1000, 0)
p3 = App.Vector(2000, 0, 0)
p4 = App.Vector(1500, -2000, 0)
bezcurve1 = Draft.make_bezcurve([p1, p2, p3, p4], closed=True)
bezcurve2 = Draft.make_bezcurve([p4, 1.3*p2, p1, 4.1*p3], closed=True)
bezcurve3 = Draft.make_bezcurve([1.7*p3, 1.5*p4, 2.1*p2, p1], closed=True)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub