PartDesign Hélice additive
PartDesign Hélice additive |
Emplacement du menu |
---|
PartDesign → Create an additive feature → Additive helix |
Ateliers |
PartDesign |
Raccourci par défaut |
Aucun |
Introduit dans la version |
0.19 |
Voir aussi |
PartDesign Hélice soustractive |
Description
L'outil Hélice additive crée un solide en balayant une esquisse ou un objet 2D sélectionné le long d'une hélice.
The profile (B), is swept around axis (A) in order to produce the solid helix (C)
Usage
- Select the sketch to be swept into a helix. A face on the existing solid can alternatively be used.
- Press the AdditiveHelix button.
- Set the Helix parameters (see next section).
- Inspect the Helix in the view window, to ensure that the parameters do not result in a self intersecting helix.
- Press OK.
Options
When creating an Additive Helix, the Helix parameters dialogue offers several parameters specifying how the sketch should be swept.
Axis
This option specifies the axis about which the sketch is to be swept.
- Vertical sketch axis: selects the vertical sketch axis.
- Horizontal sketch axis: selects the horizontal sketch axis.
- Construction line: selects a construction line contained in the sketch used by the Helix. The drop down list will contain an entry for each construction line. The first construction line created in the sketch will be labelled Construction line 1.
- Base (X/Y/Z) axis: selects the X, Y or Z axis of the Body's Origin;
- Select reference...: allows selection in the 3D view of an edge on the Body, or a datum line.
Mode
This controls what parameters will be used to define the helix, Allowable choices are: Pitch-Height, Pitch-Turns and Height-Turns.
Pitch
The distance between turns in the helix.
Height
The height of the helix (center-center).
Turns
The number of turns in the helix. Define as Height/Pitch
Cone Angle
The rate at which the radius of the helix increase along the axis. Allowable range: [-89°, +89°].
Left handed
If checked, the turning direction of helix is reversed from default clockwise to counterclockwise.
Reversed
If checked, the axis direction of helix is reversed from default.
Update view
If checked, the helix will be shown in the view, and updated automatically on every change of the parameters.
Properties
Below are properties which can be defined after creation of the feature.
- DonnéesPitch: The axial distance between two turns.
- DonnéesHeight: The total length of the helix (not accounting for the extent of the profile)
- DonnéesTurns: The number of turns (do not need to be a whole number)
- DonnéesLeft Handed:
- DonnéesReversed: true or false. See Reversed.
- DonnéesAngle: The rate at which the radius of the helix increase along the axis. Allowable range: [-89°, +89°].
- DonnéesReference axis: The the helix axis
- DonnéesMode: The helix input mode (pitch-height, pitch-turns, turns-height)
- DonnéesOutside: Not used (Used in SubtractiveHelix)
- DonnéesHas Been Edited: If false, the tool will propose an initial value for pitch based on the profile bounding box, so that self intersection is avoided.
- DonnéesRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
- DonnéesProfile: Either a sketch containing a closed contour, or a face.
- DonnéesMidplane: Not used.
- DonnéesUp to face: Not used.
- DonnéesAllow multiple face: Not used.
Examples
- Outils structure : Part, Groupe
- Outils d'aide : Créer un corps, Créer une esquisse, Éditer une esquisse, Plaquer une esquisse sur une face
- Outils de modélisation
- Outils de référence : Créer un point de référence, Créer une ligne de référence, Créer un plan de référence, Créer un système de coordonnées local, Créer une forme liée, Créer une forme liée du sous-objet(s), Créer un clone
- Outils additifs : Protrusion, Révolution, Lissage additif, Balayage additif, Hélice additive, Cube additif, Cylindre additif, Sphère additive, Cône additif, Ellipsoïde additif, Tore additif, Prisme additif, Pyramide tronquée additive
- Outils soustractifs : Cavité, Perçage, Rainure, Lissage soustractif, Balayage soustractif, Hélice soustractive, Cube soustractif, Cylindre soustractif, Sphère soustractive, Cône soustractif, Ellipsoïde soustractif, Tore soustractif, Prisme soustractif, Pyramide tronquée soustractive
- Outils de transformation : Symétrie, Répétition linéaire, Répétition circulaire, Transformation multiple, Mise à l'échelle
- Fonctions d'habillage : Congé, Chanfrein, Dépouille, Évidement
- Opérations Booléenne : Opérations Booléenne
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test