Workbenches/pt: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 9: Line 9:
Há mais bancadas em desenvolvimento, mantenha-se atento!
Há mais bancadas em desenvolvimento, mantenha-se atento!


When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and possibly other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.
Quando muda de uma bancada para a outra, as ferramentas disponíveis no interface mudam. As barras de ferramentas, barras de comandos e eventualemnte outras partes do interface mudam com a nova bancada, mas os conteúdos do seu trabalho não mudam. Poderia, por exemplo, começar a desenhar formas em 2D com a Bancada de Desenho, e depois fazer mais trabalho na Bancada de Peças.


Note that sometimes a Workbench is referred to as a ''Module''. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.
Note that sometimes a Workbench is referred to as a ''Module''. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Revision as of 20:02, 26 August 2015

O FreeCAD, como outros programas como o Revit ou Catia, é baseado no conceito de bancadas. Uma bancada pode ser considerada como um conjunto de ferramentas agrupadas para fazer uma certa tarefa. Numa oficina de carpintaria tradicional, haveria uma mesa para a pessoa que trabalha com madeira, outra para peças metálicas, e talvez uma terceira para a pessoa que faz a montagem das várias peças.

No FreeCAD aplica-se o mesmo conceito. As ferramentas são agrupadas em bancadas de acordo com as tarefas em que são usadas.

Neste momanto estão disponíveis as seguintes bancadas:

Template:Workbenches/pt

Há mais bancadas em desenvolvimento, mantenha-se atento!

When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and possibly other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.

Note that sometimes a Workbench is referred to as a Module. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Property editor/pt
PartDesign Workbench/pt