TechDraw Cote axonométrique

From FreeCAD Documentation
Revision as of 20:27, 6 March 2023 by David69 (talk | contribs) (Created page with "==Utilisation==")
Other languages:

TechDraw Cote axonométrique

Emplacement du menu
TechDraw → Annotations → Cote axonométrique
Ateliers
TechDraw
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

L'outil TechDraw Cote axonométrique ajoute une cote à une vue axonométrique. La cote peut être la longueur d'une arête ou la distance entre deux sommets. La distance sera dans un premier temps la distance projetée (c'est-à-dire telle qu'elle apparaît sur le dessin) mais elle peut être modifiée en distance 3D réelle avec l'outil TechDraw Lier une cote.

Cotes axonométriques basées sur un bord (bleu) et deux sommets (rouge)

Utilisation

  1. Do one of the following:
    • Select two edges (e1 and e2 in the image). The first edge defines the direction of the dimension line and the measured distance. The second edge defines the direction of the extension lines.
    • Select two edges (e3 and e4 in the image) and two vertices (v1 and v2 in the image). The first edge defines the direction of the dimension line. The second edge defines the direction of the extension lines. The vertices determine the measured distance.
  2. Press the Axonometric length dimension button.
  3. An axonometric dimension will be added to the view. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described on this page.

To change the properties of a dimension object either double-click it in the drawing or in the Tree view. This will open the dimension dialog.