Spreadsheet Preferences

From FreeCAD Documentation
Revision as of 23:09, 2 October 2021 by Uwestoehr (talk | contribs) (initial)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Other languages:

The preferences screen of the Spreadsheetr Workbench are found in the Preferences Editor, Edit → Preferences → Spreadsheet.

In the preferences you can specify the following:

Name Description
Delimiter Character If checked, a grid will be shown in the sketches.

This option and the following 5 preferences settings can also be specified only for single sketches in the sketcher dialog section Edit controls.

Quote Character The distance between two subsequent grid lines. Note that the default value of 0 mm will result in a 10 mm grid.
Escape Character If checked, new points will snap to the nearest grid line. Note that the points have already to be close to a grid line that the snap takes effect. The distance is a fifth of the value set for Grid size, so for a 10 mm grid, the snapping only occurs if the point is not more than 2 mm away from a grid line.