Atelier Sketcher

From FreeCAD Documentation
Revision as of 20:21, 22 December 2013 by Renatorivo (talk | contribs) (Created page with "== L'esquisse contrainte == Le '''Sketcher''' s'éloigne de cette logique. Les objets n'ont pas à être dessinés aux dimensions exactes que vous planifiez, puisqu'ils seron...")
Une esquisse simple, pleinement contrainte.‎

L'atelier Sketcher permet de créer des géométries 2D nommées esquisses, qui seront principalement utilisées par l'Atelier PartDesign, mais potentiellement par d'autres ateliers tels que l'atelier Architectural. En général, l'esquisse est le point de départ de la plupart des modèles de CAO - une esquisse simple peut être 'extrudée' en une forme 3D, une autre esquisse peut être créée pour creuser une cavité à la surface de cette forme, ou encore générer une extrusion. Avec les opérations booléennes, l'atelier Sketcher est au cœur de la conception 3D solide.

L'atelier Sketcher met à l'avant les contraintes, qui permettent de définir des formes 2D selon des critères géométriques précis. Un solveur mathématique calcule le niveau de contrainte de l'esquisse et permet l'exploration interactive des degrés de liberté.

Ici un exemple d'utilisation du sketcner Patte à l'aide du sketcher, Création d'une cavité dans la Patte

Les principes de l'esquisse contrainte

Pour décrire comment fonctionne l'atelier Sketcher, il est utile de le comparer avec la méthode « traditionnelle » du dessin.

Dessin traditionnel

La méthode traditionnelle du DAO hérite de la technique de la planche à dessin. Des vues orthogonales sont dessinées manuellement afin de produire des dessins techniques (aussi appelés plans). Les éléments sont dessinées précisément à leur taille réelle (ou à l'échelle). Si vous voulez dessiner une ligne horizontale de 100mm de longueur débutant aux coordonnées (0,0), il faut activer l'outil ligne, cliquer à l'écran ou saisir au clavier les coordonnées du premier point, puis faire une second clic ou saisir les coordonnées du second point, soit (0,100). Ou encore, vous pouvez dessiner la ligne sans vous soucier de sa position, pour la déplacer ensuite. Lorsque vous avez terminé votre dessin, vous ajoutez les cotes.

L'esquisse contrainte

Le Sketcher s'éloigne de cette logique. Les objets n'ont pas à être dessinés aux dimensions exactes que vous planifiez, puisqu'ils seront définis ultérieurement par des contraintes. Ils peuvent être dessinées librement, et tant qu'ils ne sont pas contraints, ils peuvent être manipulés et modifiés. Ces objets en quelque sorte flottent et peuvent être déplacés, étirés, pivotés, redimensionnés, etc. Ceci permet une très grande souplesse au processus de conception.

What are constraints?

Constraints are used to limit the degrees of freedom of an object. For example, a line without constraints has 4 degrees of freedom: it can be moved horizontally or vertically, it can be stretched, and it can be rotated.

Applying a horizontal or vertical constraint, or an angle constraint (relative to another line or to one of the axes), will limit its capacity to rotate, thus leaving it with 3 degrees of freedom. Locking one of its points in relation to the origin will remove another 2 degrees of freedom. And applying a dimension constraint will remove the last degree of freedom. The line is then considered fully-constrained.

Multiple objects can be constrained between one another. Two lines can be joined through one of their points with the coincident point constraint. An angle can be set between them, or they can be set perpendicular. A line can be tangent to an arc or a circle, and so on.

There are two kinds of constraints: geometric and dimensional. They are detailed in the 'The tools' section below.

What the Sketcher is not good for

The Sketcher is not intended for producing 2D blueprints. Once sketches are used to generate a solid feature, they are automatically hidden. Dimensions are only visible in Sketch edit mode.

If you only need to produce 2D views for print, and don't want to create 3D models, check out the Draft workbench (keep in mind though that the Draft workbench can also be useful to create 2D geometry not available in the Sketcher at this time, like B-Splines.)

Sketching Workflow

To be added

Good Practices

Every CAD user develops his own way of working over time, but there are some useful general principles to follow.

  • A series of simple sketches is easier to manage than a single complex one. For example, a first sketch can be created for the base 3D feature (either a pad or a revolve), while a second one can contain holes or cutouts (pockets). Some details can be left out, to be realized later on as 3D features. You can choose to avoid fillets in your sketch if there are too many, and add them as a 3D feature.
  • Always create a closed profile, or your sketch won't produce a solid, but rather a set of open faces. If you don't want some of the objects to be included in the solid creation, turn them to construction elements with the Construction Mode tool.
  • Use the auto constraints feature to limit the number of constraints you'll have to add manually.
  •  As a general rule, apply geometric constraints first, then dimensional constraints, and lock your sketch last. But remember: rules are made to be broken. If you're having trouble manipulating your sketch, it may be useful to constrain a few objects first before completing your profile.
  • If possible, center your sketch to the origin (0,0) with the lock constraint. If your sketch is not symmetric, locate one of its points to the origin, or choose nice round numbers for the lock distances. In v0.12, external constraints (constraining the sketch to existing 3D geometry like edges or to other sketches) are not implemented. This means that to locate following sketches geometry to your first sketch, you'll need to set distances relative to your first sketch manually. A lock constraint of (25,75) from the origin is more easily remembered than (23.47,73.02).
  • If you have the possibility to choose between the Length constraint and the Horizontal or Vertical Distance constraints, prefer the latter. Horizontal and Vertical Distance constraints are computationally cheaper.

The tools

The Sketcher Workbench tools are all located in the Sketcher menu that appears when you load the Sketcher Workbench.

Template:Sketcher Tools