Sketcher ConstrainLock/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "== Cum se folosește ==")
(Created page with "'''Notă:''' instrumentul de constrângere poate fi pornit și fără o selecție prealabilă, dar va lucra doar cu un singur vârf și referința de constrângeri la punctul...")
Line 18: Line 18:
# To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select '''Edit value''' in the Constraint list in the Tasks tab.
# To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select '''Edit value''' in the Constraint list in the Tasks tab.


'''Notă:''' instrumentul de constrângere poate fi pornit și fără o selecție prealabilă, dar va lucra doar cu un singur vârf și referința de constrângeri la punctul de origine al schiței. Implicit, comanda va fi în modul continuu pentru a crea noi constrângeri; apăsați o dată butonul drept al mouse-ului sau {{KEY|ESC}} pentru a părăsi comanda.
'''Note:''' the constraint tool can also be started with no prior selection, but it will then only work on a single vertex, and reference the constraints to the sketch origin point. By default the command will be in continue mode to create new constraints; press the right mouse button or {{KEY|ESC}} once to quit the command.

Revision as of 13:48, 6 October 2018

Sketcher ConstrainLock

Menu location
Sketch → Sketcher constraints → Constrain lock
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
Constrain Block

Descriere

Constraint Lock applies Horizontal distance and Vertical distance constraints to selected vertices (points) in the sketch. If a single vertex is selected, the horizontal and vertical distance constraints will refer to the sketch origin point. If two or more points are selected, horizontal and vertical distance constraints will be added for each pair of points. There is no automatic prompt to edit the constraints' values, they must be edited manually.


Cum se folosește

  1. Select one or more vertices (points) in the sketch.
  2. Press the Constrain Lock button.
  3. To edit the constraints values, double-click on a constraint value in the 3D view, or double-click on the constraint or right-click and select Edit value in the Constraint list in the Tasks tab.

Notă: instrumentul de constrângere poate fi pornit și fără o selecție prealabilă, dar va lucra doar cu un singur vârf și referința de constrângeri la punctul de origine al schiței. Implicit, comanda va fi în modul continuu pentru a crea noi constrângeri; apăsați o dată butonul drept al mouse-ului sau ESC pentru a părăsi comanda.