Vazba Uzamknout
|
|
| Umístění Menu |
|---|
| Sketch → Sketcher constraints → Constrain lock |
| Pracovní stoly |
| Sketcher, PartDesign |
| Výchozí zástupce |
| Nikdo |
| Představen ve verzi |
| - |
| Viz také |
| Constraint Coincident |
"Vytvoření zámku na vybrané položce"
Popis
Tento nástroj se pokusí plně ustavit jakoukoliv vybranou položku.
The Sketcher ConstrainLock tool applies horizontal dimension and vertical dimension constraints to points. If a single point is selected the constraints reference the origin of the sketch. If two or more points are selected the constraints reference the last point in the selection.
Díky tomu, že FreeCAD je stále ještě ve vývoji - tento nástroj předvádí podivné chování, když se pokouší 'zamknout' cokoliv jiného než bod. Například (jako ve V0.12 R4802), když uzamknete kružnici její obvodovou čárou a ne jejím středovým bodem, zobrazí se v dialogovém okně horizontální i vertikální vazební hodnoty, ale jsou nastaveny na nulu a nezobrazí se v grafickém okně.
Postup
- Nejdříve je nutné vysvítit položku, kterou chcete uzamknout. Z důvodů uvedených výše je rozumné vysvítit pouze bod.

-
Vysvícení nakreselené položky je dosaženo posunutím myši nad položku a kliknutím na levé tlačítko myši.
Vysvícená položka změní barvu na zelenou.

-
Jakmile je položka vysvícena, kliknutím levým tlačítkem myši na vazbu uzamknout uzamčete položku na jejím místě. Obyčejně je to představováno jako dvě vazby: horizontální vzdálenost od počátku a vertikální vzdálenost od počátku. Tyto vzdálenosti jsou obecně nastaveny na aktuální koordináty bodu.

-
Vertikální a horizontální vazba, které určují zámek mohou být editovány buď dvojklikem na příslušnou vazbu v náčrtu nebo v záložce vazeb rozbalovacího panelu pohledu. To otevře dialogové okno pro editaci vazeb. Kliknutí na horizontální vazbu vyvolá:
. - Zadejte požadovanou hodnotu v dialogovém okně a klikněte na OK.

- Nová hodnota vazby je ihned aplikována výkres.

- Podobně může být editována i vertikální vazba pro ustavení bodu na požadovaném místě.

See also: Drawing aids.
Continue mode
- Make sure there is no selection.
- There are several ways to invoke the tool:
- introduced in 1.0: If the Dimensioning constraints preference is set to
Single tool(default): press the down arrow to the right of thebutton and select the
Lock Position option from the dropdown.
- If this preference has a different value (and in 0.21 and below): press the
Lock Position button.
- Select the Sketch → Constraints →
Lock Position option from the menu.
- introduced in 1.0: Right-click in the 3D View and select the Dimension →
Lock Position option from the context menu.
- Use the keyboard shortcut: K then L.
- introduced in 1.0: If the Dimensioning constraints preference is set to
- The cursor changes to a cross with the tool icon.
- Select a single point.
- Two constraints are added.
- Optionally keep creating constraints.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Run-once mode
- Select one or more points.
- Invoke the tool as described above, or with the following additional option:
- Right-click in the Elements section of the Sketcher Dialog and select the
Lock Position option from the context menu.
- Right-click in the Elements section of the Sketcher Dialog and select the
- Depending on the selection two or more constraints are added.
Notes
- There is no automatic prompt to edit the constraint values. If required values can be edited manually.
- General: New Sketch, Edit Sketch, Attach Sketch, Reorient Sketch, Validate Sketch, Merge Sketches, Mirror Sketch, Leave Sketch, Align View to Sketch, Toggle Section View, Stop Operation, Grid, Snap, Rendering Order
- Geometries: Point, Polyline, Line, Arc From Center, Arc From 3 Points, Elliptical Arc, Hyperbolic Arc, Parabolic Arc, Circle From Center, Circle From 3 Points, Ellipse From Center, Ellipse From 3 Points, Rectangle, Centered Rectangle, Rounded Rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Polygon, Slot, Arc Slot, B-Spline, Periodic B-Spline, B-Spline From Knots, Periodic B-Spline From Knots, Toggle Construction Geometry
- Constraints:
- Dimensional Constraints: Dimension, Horizontal Dimension, Vertical Dimension, Distance Dimension, Radius/Diameter Dimension, Radius Dimension, Diameter Dimension, Angle Dimension, Lock Position
- Geometric Constraints: Coincident Constraint (Unified), Coincident Constraint, Point-On-Object Constraint, Horizontal/Vertical Constraint, Horizontal Constraint, Vertical Constraint, Parallel Constraint, Perpendicular Constraint, Tangent/Collinear Constraint, Equal Constraint, Symmetric Constraint, Block Constraint, Refraction Constraint
- Constraint Tools: Toggle Driving/Reference Constraints, Toggle Constraints
- Sketcher Tools: Fillet, Chamfer, Trim Edge, Split Edge, Extend Edge, External Projection, External Intersection, Carbon Copy, Select Origin, Select Horizontal Axis, Select Vertical Axis, Move/Array Transform, Rotate/Polar Transform, Scale, Offset, Mirror, Remove Axes Alignment, Delete All Geometry, Delete All Constraints, Copy Elements, Cut Elements, Paste Elements
- B-Spline Tools: Geometry to B-Spline, Increase B-Spline Degree, Decrease B-Spline Degree, Increase Knot Multiplicity, Decrease Knot Multiplicity, Insert Knot, Join Curves
- Visual Helpers: Select Under-Constrained Elements, Select Associated Constraints, Select Associated Geometry, Select Redundant Constraints, Select Conflicting Constraints, Toggle Circular Helper for Arcs, Toggle B-Spline Degree, Toggle B-Spline Control Polygon, Toggle B-Spline Curvature Comb, Toggle B-Spline Knot Multiplicity, Toggle B-Spline Control Point Weight, Toggle Internal Geometry, Switch Virtual Space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub