Náčrtník: Klon

From FreeCAD Documentation
Revision as of 16:30, 26 November 2021 by JoeKundlak (talk | contribs)

Náčrtník: Klon

Umiestnenie menu
Náčrt → Nástroje náčrtníka → Klon
Pracovné stoly
Náčrtník
Predvolená skratka
žiadna
Pridané vo verzii
0.16
Viď tiež
Náčrtník kópia, Náčrtník presun

Description

Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see Sketcher Copy.

Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.

Usage

  1. Select the sketch elements to clone.
  2. Click on Sketcher Clone or choose Sketch → Sketcher tools → Clone from the top menu.
  3. Move the mouse in the 3D view to the desired location for the clone.
    By keeping SHIFT pressed, the angle to the location point can be fixed in steps of 5°. introduced in version 0.20
  4. Left-click in the 3D view to create the clone.

No extra constraints are added for the clone.