Robot Edge2Trac/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 1: Line 1:
<br />


{{GuiCommand/it|Name=Robot Edge2Trac|Name/it=Da spigolo a traiettoria|Workbenches=[[Robot_Workbench/it|Robot]]|MenuLocation=Robot → Da spigolo a traiettoria}}
{{GuiCommand/it|Name=Robot Edge2Trac|Name/it=Da spigolo a traiettoria|Workbenches=[[Robot_Workbench/it|Robot]]|MenuLocation=Robot → Da spigolo a traiettoria}}


====Descrizione====
====Description====
Insert a new object which decompose edges to a trajectory.




====Utilizzo====
====Usage====
#You may select edges of shapes/solids
#Click on [[Image:Robot_Edge2Trac.png|32px]] or choose {{KEY| Robot}} → {{KEY|[[Image:Robot_Edge2Trac.png|32px]] Edge to Trajectory...}} from the top menu.
#A menu will pop up on the left side


[[Image:Robot_Edge2Trac_Menu.jpg]]
[[Image:Robot_Edge2Trac_Menu.jpg]]
Line 19: Line 22:




====Notes====
[[Category:UnfinishedDocu]]
You are able to change values for this trajectory by defining a [[Robot_TrajectoryDressUp| dress-up-object]].





Revision as of 19:32, 3 April 2016

Da spigolo a traiettoria

Posizione nel menu
Robot → Da spigolo a traiettoria
Ambiente
Robot
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Description

Insert a new object which decompose edges to a trajectory.


Usage

  1. You may select edges of shapes/solids
  2. Click on or choose Robot Edge to Trajectory... from the top menu.
  3. A menu will pop up on the left side

In the top white box there will be displayed the name of the shape/solid present in the scene.
By selecting edges they will appear with their name in the lowest white box.
By clicking on Apply The entries "Edges" and "Cluster" will turn green and the numbers beside them will show how many elements were recognized.
By clicking on OK you will close this dialog.


Notes

You are able to change values for this trajectory by defining a dress-up-object.