Notes de version 0.20
Cette page suit les nouvelles fonctionnalités à mesure qu'elles sont ajoutées à la version de développement de FreeCAD, qui est actuellement la 0.20. Lorsque les fonctionnalités de la 0.20 seront figées, supprimez ces messages et n'ajoutez plus d'autres fonctionnalités à cette page. FreeCAD 0.20 devrait sortir en 202x.
Des fonctionnalités sont-elles manquantes ? Mentionnez-les dans les Notes de publication pour v0.20 du fil de discussion.
Consultez l'aide FreeCAD pour savoir comment contribuer à FreeCAD.FreeCAD 0.20 a été publié le DD mois 202x, récupérez-le sur la page de Téléchargement. Ceci est un résumé des changements les plus intéressants. La liste complète des modifications est disponible dans le journal des modifications MantisBT bugtracker FC 0.20.
Les notes de version plus anciennes de FreeCAD sont disponibles dans la Liste des fonctionnalités.
Points forts
Généralités
Python 3 et Qt5
Quelques problèmes
Développement
Pour compiler FreeCAD sous Windows, il existe différents Libpacks (bibliothèques pré-emballées) disponibles :
- Libpack pour Windows avec Qt xx, OCC yy et Python zz
Autres nouvelles du développement :
Documentation
Limitations connues
Interface utilisateur
File:Navi Cube 0.20.gif | Le cube de navigation a été retravaillé pour activer ces nouvelles fonctionnalités :
|
Améliorations futures de l'Interface Utilisateur
- Il est maintenant possible de faire un panoramique de la vue du Graphique de Dépendance avec la souris. Discussion sur le forum, pull request #4638.
- Correction d'un problème où l'utilisation d'un stylet de tablette (par exemple, une tablette Wacom) était lente au point d'être complètement inutilisable. Discussion sur le forum, pull request #4687.
App::Link et assemblage
Core System, App, Base et espaces de noms de la Gui
Gestionnaire d'Addon
Atelier Arch (Architecture)
Atelier Draft (Planche à dessin)
Améliorations futures de Draft
Atelier FEM
Effect of Mesh Size From Curvature; left: set to 12, right: deactivated |
There is a new property for the Gmsh mesher. The number of mesh elements per times the radius of the curvature can be specified. The default is 12 and to get a finer mesh at small corners or holes, this value can be increased for better results. This feature requires Gmsh 4.8 or newer. |
File:FEM Gmsh-RecombinationAlgorithm.png Effect of the rcombination algorithm; left: using Simple, right: using Simple full-quad |
FreeCAD allows now to select an algorithm as well as 3D mesh recombination for the Gmsh mesher. For more details about the mesh element recombination see this Wiki page. |
Further FEM Improvements
- The element order of Gmsh meshes can be changed via the mesh dialog. PR #4660
- Material cards can now contain values for the electrical conductivity. PR #4647
- Material cards added for Nitrogen and Argon. PR #4649
- Support for the Gmsh mesh algorithms "HXT" (3D) and "Packing Parallelograms" (2D) added. PR #4654
- Allow to set for the Gmsh property High Order Optimize a certain algorithm. PR #4705
Import
Material handling
Mesh
Further improvements
Part Workbench
Further improvements
- The dialog to edit Cylinders allows now to specify an angle in respect to the normal of the chosen attachment plane. This way one can create skew cylinders. Pull request #4708
PartDesign Workbench
File:PD Pad-Length-alog-direction.gif Effect of the new option Length along sketch normal. Click on the image to show the animation. |
There is a new option to pad a certain length along the direction. The length is either measured along the sketch normal or along the custom direction. |
The dialog to edit Cylinder (additive and subtractive) allows now to specify an angle in respect to the normal of the chosen attachment plane. This way one can create skew cylinders. |
Further improvements
- The Helix feature has the new mode Height-Turns-Growth to create flat spirals. Forum thread PR #4590
- The Sprocket feature can now create also ISO-normed sprockets. Forum thread PR #4478
Path Workbench
Render Workbench
Sketcher Workbench
New Split function to split existing lines or arcs. |
Further improvements
- Refactored Trim support Pull Request Discussion <-- Needs screencasts
- Visibility automation allows to open Sketcher in Section mode when entering edit mode Pull request Discussion
Spreadsheet Workbench
- It is now possible to select in the row/column context-menu at what positions new rows/columns will be inserted. Furthermore, when selecting several rows/columns, the row/column context-menu offers now to insert as many new rows/columns as selected. pull request #4704.