Part Fuse/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 1: Line 1:
{{GuiCommand|Name=Part Fuse|MenuLocation=Part → Fuse|Workbenches=[[Part_Module|Part]], [[Complete_Workbench|Complete]]|SeeAlso=[[Part Cut|Part Cut]], [[Part Common|Part Common]]}}
{{GuiCommand/sv|Name=Part Fuse|Name/sv=Part Fuse|MenuLocation=Part → Fuse||Workbenches=[[Part_Module/sv|Part]], Komplett|SeeAlso=[[Part Cut/sv|Part Cut]], [[Part Common/sv|Part Common]]}}


Förenar flera valda Del objekt till ett objekt. Denna operation är helt parametrisk, så de ingående delarna ken förändras och resultatet beräknas om.
Förenar flera valda Del objekt till ett objekt. Denna operation är helt parametrisk, så de ingående delarna ken förändras och resultatet beräknas om.

Revision as of 21:59, 3 March 2016

Part Fuse

Menyplacering
Part → Fuse
Arbetsbänkar
Part, Komplett
Standard genväg
Ingen
Introducerad i version
-
Se även
Part Cut, Part Common

Förenar flera valda Del objekt till ett objekt. Denna operation är helt parametrisk, så de ingående delarna ken förändras och resultatet beräknas om.

This command allows you to perform quickly this Boolean operation.

How to use

  1. Select two or more shapes
  2. Press the Part Fuse button.

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumend that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from the fuse, by dragging them in or out of the fuse feature in the treeview with the mouse. A manual recompute (press F5 key or click on the recompute icon) is required to see the results.

After this operation it may be necessary to clean the shape with RefineShape.