Part Circle/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 13: Line 13:


A Circle geometric primitive is available from the Create Primitives dialogue in the Part workbench.
A Circle geometric primitive is available from the Create Primitives dialogue in the Part workbench.
# Switch to the [[Image:Workbench_Part.svg|24px]] [[Part Workbench]]
# Switch to the [[Image:Workbench_Part.svg|24px]] [[Part_Module|Part]]
# There are several ways to access the Create Primitives dialogue:
# There are several ways to access the Create Primitives dialogue:
#* Press the [[Image:Part_Primitives.svg|24px]] [[Part_Primitives|Primitives]] button located in the Part toolbar
#* Press the [[Image:Part_Primitives.svg|24px]] [[Part_Primitives|Primitives]] button located in the Part toolbar

Revision as of 17:12, 13 December 2020

Part_Circle

Ubicación en el Menú
Part → Create Primitives → Circle
Entornos de trabajo
Part, OpenSCAD
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
..

Description

This command will create a circular curved edge. With the default values, the circular curved edge will be closed and therefore will be a circle. If the properties Angle 0 or Angle 1 are changed from their default values (0 and 360) the edge will be an open curve, an arc.

Alternatively a Part Circle can be initially defined from three points. Once created the circle will only contain the standard Part Circle properties and will no longer contain a reference to the creation points.

Usage

A Circle geometric primitive is available from the Create Primitives dialogue in the Part workbench.

  1. Switch to the Part
  2. There are several ways to access the Create Primitives dialogue:

Properties

  • Radius: the radius of the curved edge (arc or circle)
  • Angle 0: start of the curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 1: end of the curved edge, (degrees anti-clockwise), the default value is 360