PartDesign Cono Sustractivo

From FreeCAD Documentation
Revision as of 17:11, 30 May 2021 by Stylishcp (talk | contribs) (Created page with "==Opciones==")

PartDesign Cono sustractivo

Ubicación en el Menú
Part Design → Crear una primitiva sustractiva → Cono sustractivo
Entornos de trabajo
PartDesign
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.17
Ver también
Create a subtractive primitive, Additive Cone

Descripción

Inserta un Cono sustractivo en el Body (cuerpo) activo. Su forma es sustraída del sólido existente.

A la izquierda: Body activo (A) Mostrado en color gris y el Cono sustractivo (B) mostrado en color rojo transparente. El resultado se puede apreciar a la derecha.

Uso

  1. Presionar el botón Cono sustractivo . Nota: El Cono sustractivo forma parte de un icono de herramientas llamado Crear una primitiva sustractiva. Tras abrir FreeCAD, la Caja sustractiva es la única mostrada en la barra de herramientas. Para obtener el Cono, pinchar en la flecha que indica hacia abajo que está al lado del icono visible y seleccionar Cono sustractivo en el menú desplegable.
  2. Seleccionar los parámetros de la primitiva (para un cono completo, poner 0 como el valor de uno de sus radios) y el Attachment.
  3. Aceptar OK.
  4. Una operación de Cono aparece dentro del Body(cuerpo) activo.

Opciones

The Cone can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatosAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatosLabel: label given to the Cone object. Change to suit your needs.
  • DatosRadius1: the radius value at the cone's base.
  • DatosRadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
  • DatosHeight: the height of the cone along its axis.
  • DatosAngle: angle of rotation of the cross section (360 degrees in a full cone).