Part Design: Simmetria

From FreeCAD Documentation
Revision as of 19:31, 7 October 2014 by Renatorivo (talk | contribs) (Created page with "left {{clear}}")

Simmetria

Posizione nel menu
PartDesign → Simmetria
Ambiente
PartDesign, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Lo strumento Simmetria usa come input una funzione selezionata, e ne produce una copia riflettendo l'originale rispetto a un determinato piano. Detta funzione può essere una protrusione o uno scavo applicati a un solido esistente.

Per esempio:

Use

Mirror Plane Selection

When creating a mirrored feature, the 'Mirrored parameters' dialogue offers four different ways of specifying the mirror line or plane.

Horizontal sketch axis

Uses the horizontal axis of the sketch as the axis of symmetry.

Vertical sketch axis

Uses the vertical axis of the sketch as the axis of symmetry.

Select reference...

Allows you to select a plan (such as a face of an object) to use as a mirror plane.

Custom Sketch Axis

If the sketch which defines the feature to be mirrored also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled 'Sketch axis 0'.

Preview

The mirror result can be previewed in real time before clicking OK by checking "Update view".

Limitations

  • Currently, only the last feature in the feature tree can be chosen as the 'original' therefore,
    • it is not possible to choose more than one feature to be mirrored
    • it is not possible to select more features to add to the list view of 'originals'
  • Once the Mirrored feature has been started or been completed, it is not possible to replace the original feature for a different one.