FEM ResultShow/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Lorsque la boîte de dialogue est ouverte, le maillage résultant s'affiche automatiquement.")
(Created page with "La boîte de dialogue est illustrée à gauche et offre les fonctionnalités suivantes :")
Line 41: Line 41:
[[File:FEM_Result-Object-Dialog.png|left|framed]]
[[File:FEM_Result-Object-Dialog.png|left|framed]]


La boîte de dialogue est illustrée à gauche et offre les fonctionnalités suivantes :
The dialog is shown at the left and offers the following features:


* Select a result type and the minimum and maximum will be displayed in the dialog. The result mesh will be colored accordingly.
* Select a result type and the minimum and maximum will be displayed in the dialog. The result mesh will be colored accordingly.

Revision as of 20:24, 11 October 2022

Other languages:

FEM Afficher les résultats

Emplacement du menu
Résultats → Afficher les résultats
Ateliers
FEM
Raccourci par défaut
R S
Introduit dans la version
-
Voir aussi
FEM Pipeline de résultats, FEM Tutoriel

Description

La commande Afficher les résultats ouvre la boîte de dialogue pour un objet résultat FEM. Un objet Result est automatiquement créé lorsqu'une analyse FEM a été effectuée en utilisant le solveur Calculix ou Z88.

Un objet Result contient le maillage résultant et permet de visualiser les résultats. Il est conçu et donc limité aux résultats thermomécaniques. Pour ces types de résultats, l'objet Result peut être utilisé comme alternative à un pipeline de résultats. Un pipeline de résultats peut être utilisé pour visualiser n'importe quel type de résultats (également électriques, etc.).

Les unités utilisées pour l'objet Result sont celles du système d'unités alors que pour un pipeline de résultats les unités sont SI.

La visualisation des résultats n'est active que lorsque la boîte de dialogue est ouvert. Cependant, les paramètres de la boîte de dialogue sont stockés dans le fichier du modèle FreeCAD.

Utilisation

Pour afficher la boîte de dialogue des résultats :

  1. sélectionnez l'objet résultat dans l'affichage Tree view,
  2. puis appuyez sur le bouton de la barre d'outils Afficher les résultats
  3. ou utilisez le menu Résultats → Afficher le résultat (raccourci R puis S).
  4. vous pouvez également double-cliquer sur l'objet résultat dans l'arborescence.

Lorsque la boîte de dialogue est ouverte, le maillage résultant s'affiche automatiquement.

La boîte de dialogue est illustrée à gauche et offre les fonctionnalités suivantes :

  • Select a result type and the minimum and maximum will be displayed in the dialog. The result mesh will be colored accordingly.
  • Click on the button Histogram to get a histogram what amount of result mesh nodes have a certain result. The histogram plot can be modified by the buttons in its toolbar. it is also possible to save the histogram as image using the save button from its toolbar.
  • Check the option Show to enables the slider and to visualize the result mesh deformation. The slider value is a factor with which the result Displacement Magnitude is multiplied.
    Note: The slider only affects the Displacement Magnitude, not its X, Y, Z components.
  • With the button Calculate you can perform calculations of the results. Input in the text box below the button an equation of you choice. Predefined is the equation P1-P3. This means the result Min Principal Stress is subtracted from the Max Principal Stress. The variables for the possible results are explained in the box Hints user defined equations.
    After you input an equation press the button and the result will be shown in the fields displaying the minimum and maximum. The result mesh will be colored accordingly.
    Note: The calculation results always have the unit MPa, mm or T, no matter what unit system you use.