FEM EquationElectricforce/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Cette équation décrit la force électrostatique agissant sur une surface.")
(Created page with "Pour plus d'informations sur les mathématiques de l'équation, voir [http://www.elmerfem.org/blog/documentation/ Elmer models manual], section ''Electrostatic force''.")
Line 23: Line 23:
Cette équation décrit la force électrostatique agissant sur une surface.
Cette équation décrit la force électrostatique agissant sur une surface.


For info about the math of the equation, see the [http://www.elmerfem.org/blog/documentation/ Elmer models manual], section ''Electrostatic force''.
Pour plus d'informations sur les mathématiques de l'équation, voir [http://www.elmerfem.org/blog/documentation/ Elmer models manual], section ''Electrostatic force''.


==Usage==
==Usage==

Revision as of 12:32, 8 October 2022

Other languages:

FEM Équation de force électrique

Emplacement du menu
Solveur → Équation de force électrique
Ateliers
FEM
Raccourci par défaut
Aucun
Introduit dans la version
0.19
Voir aussi
FEM Equation électrostatique

Description

Cette équation décrit la force électrostatique agissant sur une surface.

Pour plus d'informations sur les mathématiques de l'équation, voir Elmer models manual, section Electrostatic force.

Usage

  1. After adding an Elmer solver as described here, select it in the tree view.
  2. Either use the toolbar button or the menu Solve → Electricforce equation.
  3. Now either use the toolbar button or the menu Solve → Electrostatic equation. This is important because the electricforce equation needs the potential field calculated by the Electrostatic equation.
  4. Change the equation's solver settings or the general solver settings if necessary.

The electricforce equation only calculates the force for faces with a electrostatic potential constraint if the constraint's option Calculate Electric Force is used.

Solver Settings

For the general solver settings, see the Elmer solver settings.

The electricforce equation provides this special setting:

  • DonnéesExec Solver: By default the equation is only solved after a timestep passed. This means it is first solved after the solution of other equations converged. When the setting is Always the equation is solved after every iteration within a time step. (For steady-state simulations the whole simulation is one time step.)

Constraint Information

The electricforce equation does not have own constraints. It takes the electrostatic potential constraint from the Electrostatic equation. In the constraint it is important to use the option Calculate Electric Force.

Result

The result is the electric force density in .