Arch Stairs/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Category:Arch/ro")
No edit summary
Line 5: Line 5:
Instrumentul Scara vă permite să construiți automat mai multe tipuri de scări. În prezent, sunt suportate doar scările drepte (cu sau fără odihnă centrală). Scările pot fi construite de la zero sau dintr-o linie [[Line Line | linie]], caz în care scările urmează linia. Dacă linia nu este orizontală, dar are o înclinație verticală, scările vor urma și ele această pantă.
Instrumentul Scara vă permite să construiți automat mai multe tipuri de scări. În prezent, sunt suportate doar scările drepte (cu sau fără odihnă centrală). Scările pot fi construite de la zero sau dintr-o linie [[Line Line | linie]], caz în care scările urmează linia. Dacă linia nu este orizontală, dar are o înclinație verticală, scările vor urma și ele această pantă.


See the [http://en.wikipedia.org/wiki/Stairs Stairs entry in wikipedia] for a definition of the different terms used to describe parts of stairs.
A se vedea [http://en.wikipedia.org/wiki/Stairs Stairs entry in wikipedia] pentru o definiție a diferitor termeni utilizați pentru a descrie piese/părți ale scărilor.


[[Image:Arch Stairs example.jpg|640px]]
[[Image:Arch Stairs example.jpg|640px]]

Revision as of 18:29, 3 December 2018

Arch Stairs

Menu location
Arch → Stairs
Workbenches
Arch
Default shortcut
S R
Introduced in version
-
See also
None

Descriere

Instrumentul Scara vă permite să construiți automat mai multe tipuri de scări. În prezent, sunt suportate doar scările drepte (cu sau fără odihnă centrală). Scările pot fi construite de la zero sau dintr-o linie linie, caz în care scările urmează linia. Dacă linia nu este orizontală, dar are o înclinație verticală, scările vor urma și ele această pantă.

A se vedea Stairs entry in wikipedia pentru o definiție a diferitor termeni utilizați pentru a descrie piese/părți ale scărilor.

On the above image, two stairs were created, one with a massive structure and a landing, and another one with a single stringer.

Opţiuni

Cum se folosește

  1. Press the Arch Stairs button, or press S, R keys
  2. Adjust the desired properties. Some parts of the stairs, such as the structure, might not appear immediately, if any of the properties makes it impossible, such as a structure thickness of 0.

Proprietăți

Base

  • DateAlign: The alignment of these stairs on their baseline, if applicable.
  • DateBase: The baseline of these stairs, if any.
  • DateHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
  • DateLength: The total length of these stairs if no baseline is defined.
  • DateWidth: The width of these stairs.

Steps

  • DateNosing: The size of the nosing.
  • DateNumber of Steps: The numbers of steps (risers) in these stairs.
  • DateRiser Height: The height of the risers.
  • DateTread Depth: The depth of the treads.
  • DateTread Thickness: The thickness of the treads.

Structure

  • DateLandings: The type of landings.
  • DateStringer Offset: The offset between the border of the stairs and the structure.
  • DateStringer Width: The width of the stringers.
  • DateStructure: The type of structure of these stairs.
  • DateStructure Thickness: The thickness of the structure.
  • DateWinders: The type of winders.

Scrip-Programare

Stairs can be created from python scripts and macros by using the following function:

makeStairs([base], [length], [width], [height], [steps])
  • Creates a stairs object with the given attributes.
  • Returns the new stairs object.

Exempluː

import Arch
makeStairs(length=5, width=1.2, height=3, steps=14)

Limitări

  • Nu este disponibil înainte de versiunea FreeCAD 0.14
  • Momentan sunt disponibile doar scări drepte
  • Consultați intrarea forumului forum entry pentru scări circulare.
  • A se vedea forum announcement..