Architektura Schody
Arch Stairs |
Menu location |
---|
Arch → Stairs |
Workbenches |
Arch |
Default shortcut |
S R |
Introduced in version |
- |
See also |
None |
Arch Schody |
Umístění Menu |
---|
Arch → Stairs |
Pracovní stoly |
Modul architektura |
Výchozí zástupce |
S R |
Představen ve verzi |
- |
Viz také |
Nikdo |
Popis
Nástroj Schody pro vytváření a definování schodišť jakéhokoliv typu
See the Stairs entry in wikipedia for a definition of the different terms used to describe parts of stairs.
Na obrázku nahoře jsou vytvořena dvě schodiště, jedno s plnou strukturou a podestou a druhé s jednotlivými stupni.
Použití
Stiskněte tlačítko Schody nebo klávesy S, R
- Nastavte požadované vlastnosti. Některé z části schodiště, jako je struktura, se nemusí projevit okamžitě, pokud je to u některých vlastností nemožné, jako je třeba tloušťka struktury nastavená na nulu.
Vlastnosti
Základ
- ÚdajeAlign: The alignment of these stairs on their baseline, if applicable.
- ÚdajeBase: The baseline of these stairs, if any.
- ÚdajeHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
- ÚdajeLength: The total length of these stairs if no baseline is defined.
- ÚdajeWidth: The width of these stairs.
Steps
- ÚdajeNosing: The size of the nosing.
- ÚdajeNumber of Steps: The numbers of steps (risers) in these stairs.
- ÚdajeRiser Height: The height of the risers.
- ÚdajeTread Depth: The depth of the treads.
- ÚdajeTread Thickness: The thickness of the treads.
Structure
- ÚdajeLandings: The type of landings.
- ÚdajeStringer Offset: The offset between the border of the stairs and the structure.
- ÚdajeStringer Width: The width of the stringers.
- ÚdajeStructure: The type of structure of these stairs.
- ÚdajeStructure Thickness: The thickness of the structure.
- ÚdajeWinders: The type of winders.
Scripting
Stairs can be created from python scripts and macros by using the following function:
makeStairs([base], [length], [width], [height], [steps])
- Creates a stairs object with the given attributes.
- Returns the new stairs object.
Example:
import Arch
makeStairs(length=5, width=1.2, height=3, steps=14)
Limitations
- Not available before FreeCAD version 0.14
- Only straight stairs are available at the moment
- See the forum entry for circle stairs.
- See the forum announcement.