Part Sphere
Part Sphere |
Ubicación en el Menú |
---|
Part -> Sphere |
Entornos de trabajo |
Part Module,Complete |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Part CreatePrimitives |
Description
Crea una esfera paramétrica simple, con los parámetros de posición, ángulo1, ángulo2, ángulo3 y radio. La esfera se situará en el origen (point 0,0,0). Los parámetros de ángulo permiten crear una porción de la esfera en lugar de la esfera completa (por defecto están establecidos a 360°)
Usage
- Switch to the Part Workbench
- There are several ways to invoke the command:
Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
The properties of the object can be edited, either in the Property editor or by double-clicking the object in the Tree view.
Properties
Data
Sphere
- DatosRadius: Radius of the sphere
- DatosAngle 1: 1nd angle to cut / define the sphere
- DatosAngle 2: 2nd angle to cut / define the sphere
- DatosAngle 3: 3rd angle to cut / define the sphere
Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.
Scripting
A Part Sphere can be created using the following function:
sphere = FreeCAD.ActiveDocument.addObject("Part::Sphere", "mySphere")
- Where
"mySphere"
is the name for the object. - The function returns the newly created object.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub