Surface Remplissage
Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.
Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.
Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Surface Remplissage |
Emplacement du menu |
---|
Surface → Filling... |
Ateliers |
Surface |
Raccourci par défaut |
Aucun |
Introduit dans la version |
0.17 |
Voir aussi |
Aucun |
Description
Surface Filling creates a surface from a series of connected boundary edges.
The surface can be modified by adding constraint edges and vertices which the surface must pass through.
Exemple de surface remplie, délimitée par quatre arêtes situées dans le plan XY; (à gauche) uniquement les quatre arêtes et (à droite) une courbe supplémentaire dans l'espace définissant la courbure de la surface
Utilisation
The base edges that form the closed contour, as well as the auxiliary vertices and edges, can belong to 2D curves from Draft or the Sketcher, but can also belong to 3D solid objects such as those created with the Part or PartDesign Workbenches.
Options
- Inside the Filling section.
- Add edge: press once to start picking edges in the 3D view. Individual lines such as Draft BSplines and Sketcher BSplines can be chosen, as well as any edge from solid objects, like those of PartDesign Bodies and Part Primitives.
- Remove edge: press once to start picking edges in the 3D view; these must be edges that were previously picked with Add edge.
- Right mouse button: open the context menu and select Remove, or press Del in the keyboard, to remove the currently selected edge in the list.
- Inside the Unbound Edges section similar Add edge and Remove edge buttons are available to pick supporting edges to control the curvature of the original surface.
- Inside the Filling section similar Add vertex and Remove vertex buttons are available, in this case to pick supporting vertices.
- Press Cancel or Esc to abort the current operation.
Propriétés
A Surface Filling (Surface::Filling
class) is derived from the basic Part Feature (Part::Feature
class, through the Part::Spline
subclass), therefore it shares all the latter's properties.
In addition to the properties described in Part Feature, the Surface Filling has the following properties in the property editor.
Data
Filling
- DonnéesProperty: description de la propriété
- VueProperty: description de la propriété
View
Base
- VueControl Points (
Bool
): it defaults tofalse
; if set totrue
, it will show an overlay with the control points of the surface.
Scripting
See also: FreeCAD Scripting Basics.
The Surface Filling tool can be used in macros and from the Python console by adding the Surface::Filling
object.
- The edges to be used to define the surface must be assigned as a LinkSubList to the
BoundaryEdges
property of the object. - Auxiliary edges and vertices must be assigned as a LinkSubLists to the
UnboundEdges
andPoints
properties of the object. - All objects with edges need to be computed before they can be used as input for the properties of the Filling object.
import FreeCAD as App
import Draft
doc = App.newDocument()
a = App.Vector(-20, -20, 0)
b = App.Vector(-18, 25, 0)
c = App.Vector(60, 26, 0)
d = App.Vector(33, -20, 0)
points1 = [a, App.Vector(-20, -8, 0), App.Vector(-17, 7, 0), b]
obj1 = Draft.make_bspline(points1)
points2 = [b, App.Vector(0, 25, 0), c]
obj2 = Draft.make_bspline(points2)
points3 = [c, App.Vector(37, 4, 0), d]
obj3 = Draft.make_bspline(points3)
points4 = [d, App.Vector(-2, -18, 0), a]
obj4 = Draft.make_bspline(points4)
doc.recompute()
surf = doc.addObject("Surface::Filling", "Surface")
surf.BoundaryEdges = [(obj1, "Edge1"),
(obj2, "Edge1"),
(obj3, "Edge1"),
(obj4, "Edge1")]
doc.recompute()
# ---------------------------------------------------------
points_spl = [App.Vector(-10, 0, 2),
App.Vector(4, 0, 7),
App.Vector(18, 0, -5),
App.Vector(25, 0, 0),
App.Vector(30, 0, 0)]
aux_edge = Draft.make_bspline(points_spl)
doc.recompute()
surf.UnboundEdges = [(aux_edge, "Edge1")]
doc.recompute()
# ---------------------------------------------------------
aux_v1 = Draft.make_line(App.Vector(-13, -12, 5),
App.Vector(-13, -12, -5))
aux_v2 = Draft.make_line(App.Vector(-3, 18, 5),
App.Vector(-3, 18, -5))
doc.recompute()
surf.Points = [(aux_v1, "Vertex2"),
(aux_v2, "Vertex1")]
doc.recompute()
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test