TechDraw Annotation
TechDraw Annotation |
Menu location |
---|
TechDraw → Annotations → Insert Annotation |
Workbenches |
TechDraw |
Default shortcut |
None |
Introduced in version |
- |
See also |
Draft Text, Draft ShapeString |
Description
The Annotation tool adds a text block to a drawing page.
Annotation in the drawing page
Usage
- If you have multiple drawing pages in your document, you will need to select the desired page in the tree.
- Press the Insert Annotation button
- A text block containing Default Text will appear on the page. Use the property editor to change the text. Drag the Annotation to the required position.
- You may need to press Refresh and/or Redraw Page to get your text to change.
Modifying the annotation through the property editor
Note: some characters interfere with the internal representation of the Annotation text. Specifically, these are the double quote "
, less than <
, and greater than >
symbols; these must be replaced by HTML escape characters, "
, <
, and >
respectively. See Character encodings in HTML for details.
Properties
The Annotation inherits all applicable basic View properties except DonnéesScale. Use the DonnéesTextSize property instead.
- DonnéesText: The text to be displayed.
- DonnéesFont: The name of the font to use. Annotation will use the best match of installed fonts.
- DonnéesTextColor: The color of the text.
- DonnéesTextSize: The size of the text in mm.
- DonnéesMaxWidth: The maximum width of the Annotation block. -1 indicates no maximum width.
- DonnéesLineSpace: Line spacing adjustment (%).
- DonnéesTextStyle: "Normal", "Bold", "Italic", "Bold-Italic"
Scripting
See also: TechDraw API and FreeCAD Scripting Basics.
The New Annotation tool can be used in macros and from the Python console by using the following functions:
anno = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewAnnotation','TestAnno')
anno.Text = ['Different Text']
anno.TextStyle = 'Bold'
rc = page.addView(anno)
Notes
- Pages : Page par défaut, Page à partir d'un modèle, Redessiner une page, Tout imprimer
- Vues : Vue, Vue active, Groupe de projections, Vue en coupe, Vue en coupe complexe, Vue détaillée, Vue d'un objet Draft, Vue d'un objet Arch, Vue d'un objet Spreadsheet, Fenêtre de rognage, Copier une vue, Projection de forme
- Empilement : Empiler en haut, Empiler en bas, Empiler vers le haut, Empiler vers le bas
- Décorations : Hachures par motif, Hachures géométriques, Symbole, Image, Bascule des cadres
- Cotes : Cote de longueur, Cote horizontale, Cote verticale, Cote de rayon, Cote de diamètre, Cote angulaire, Cote angulaire par 3 points, Cote étendue horizontale, Cote étendue verticale, Lier une cote, Infobulle, Cote axonométrique, Cote à partir des points du repère, Réparation des cotes
- Annotations : Annotation, Ligne de référence, Annotation texte enrichi, Point cosmétique, Points médians, Sommets quadrants, Ligne centrale à une face, Ligne centrale entre 2 lignes, Ligne centrale entre 2 points, Ligne cosmétique par 2 points, Cercle cosmétique, Apparence des lignes, Montrer tout, Soudure, Symbole d'état de surface, Tolérance de trou/d'arbre
- Extensions :
- Attributs et modifications : Sélection des attributs, Modification des attributs, Prolonger, Raccourcir, Verrouiller/déverrouiller, Position d'une vue en coupe, Aligner horizontalement, Aligner verticalement, Aligner obliquemement, Cascade horizontale, Cascade verticale, Cascade oblique, Calculer l'aire des faces sélectionnées, Calculer la longueur d'arc d'arêtes sélectionnées, Personnaliser le format d'infobulle
- Lignes centrales, filetage et taraudage : Axes de centrage, Axes de centrage de trous/vis, Corps de taraudage, Taraudage, Corps de filetage, Filetage, Intersection de lignes, Ajouter un sommet décalé, Cercle, Arc, Cercle par 3 points, Ligne parallèle, Ligne perpendiculaire
- Cotes : Cotes horizontales, Cotes verticales, Cotes obliques, Cotes parallèles horizontales, Cotes parallèles verticales, Cotes parallèles obliques, Cote horizontale chanfrein, Cote verticale chanfrein, Longueur d'arc, Diamètre '⌀', Section tube '〼', Supprimer les symboles, Plus de décimales, Moins de décimales
- Exportation : Exporter au format SVG, Exporter au format DXF
- Fonctions supplémentaires : Groupe de lignes, Modèles, Hachures, Dimensionnement géométrique et tolérance, Préférences
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test