Translations:Manual:All workbenches at a glance/12/de: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
No edit summary |
||
Line 21: | Line 21: | ||
|Zeichnen eines Kreises, bestimmt von 3 auf ihm liegenden Punkten |
|Zeichnen eines Kreises, bestimmt von 3 auf ihm liegenden Punkten |
||
|- |
|- |
||
| [[Image:Sketcher_CreateEllipse.png|32px]] [[ |
| [[Image:Sketcher_CreateEllipse.png|32px]] [[Sketcher CreateEllipseByCenter|Ellipse]] |
||
| Zeichnen einer Ellipse, bestimmt von Mittelpunkt und je einem Endpunkt der beiden Ellipsenachsen |
| Zeichnen einer Ellipse, bestimmt von Mittelpunkt und je einem Endpunkt der beiden Ellipsenachsen |
||
| [[Image:Sketcher_CreateEllipse3Point.png|32px]] [[ |
| [[Image:Sketcher_CreateEllipse3Point.png|32px]] [[Sketcher CreateEllipseBy3Points|Ellipse 3 points]] |
||
| Zeichnen einer Ellipse, bestimmt von beiden Endpunkten der großen und einem Endpunkt der kleinen Ellipsenachse |
| Zeichnen einer Ellipse, bestimmt von beiden Endpunkten der großen und einem Endpunkt der kleinen Ellipsenachse |
||
|- |
|- |
||
| [[Image:Sketcher_CreateArcOfEllipse.png|32px]] [[ |
| [[Image:Sketcher_CreateArcOfEllipse.png|32px]] [[Sketcher_CreateArcOfEllipse|Arc of ellipse]] |
||
| Zeichnen eines elliptischen Bogens, bestimmt von Mittelpunkt, einem Endpunkt der großen Ellipsenachse und Anfangs- und Endpunkt |
| Zeichnen eines elliptischen Bogens, bestimmt von Mittelpunkt, einem Endpunkt der großen Ellipsenachse und Anfangs- und Endpunkt |
||
| [[Image:Sketcher_CreatePolyline.png|32px]] [[Sketcher_Polyline|Polyline]] |
| [[Image:Sketcher_CreatePolyline.png|32px]] [[Sketcher_Polyline|Polyline]] |
||
Line 71: | Line 71: | ||
| Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint. |
| Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint. |
||
|- |
|- |
||
| [[Image:Constraint_Parallel.png|32px]] [[ |
| [[Image:Constraint_Parallel.png|32px]] [[Sketcher ConstrainParallel|Parallel]] |
||
| Constrains two or more lines parallel to one another. |
| Constrains two or more lines parallel to one another. |
||
| [[Image:Constraint_Perpendicular.png|32px]] [[ |
| [[Image:Constraint_Perpendicular.png|32px]] [[Sketcher ConstrainPerpendicular|Perpendicular]] |
||
| Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint. |
| Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint. |
||
|- |
|- |
||
| [[Image:Constraint_Tangent.png|32px]] [[ |
| [[Image:Constraint_Tangent.png|32px]] [[Sketcher ConstrainTangent|Tangent]] |
||
| Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. |
| Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. |
||
| [[Image:Constraint_EqualLength.png|32px]] [[ |
| [[Image:Constraint_EqualLength.png|32px]] [[Sketcher ConstrainEqual|Equal length]] |
||
| Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal. |
| Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal. |
||
|- |
|- |
||
| [[Image:Constraint_Symmetric.png|32px]] [[ |
| [[Image:Constraint_Symmetric.png|32px]] [[Sketcher ConstrainSymmetric|Symmetric]] |
||
| Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. |
| Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. |
||
| [[Image:Sketcher_ConstrainLock.png|32px]] [[ |
| [[Image:Sketcher_ConstrainLock.png|32px]] [[Sketcher ConstrainLock|Lock]] |
||
| Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item |
| Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item |
||
|- |
|- |
||
| [[Image:Constraint_HorizontalDistance.png|32px]] [[ |
| [[Image:Constraint_HorizontalDistance.png|32px]] [[Sketcher ConstrainDistanceX|Horizontal distance]] |
||
| Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. |
| Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. |
||
| [[Image:Constraint_VerticalDistance.png|32px]] [[ |
| [[Image:Constraint_VerticalDistance.png|32px]] [[Sketcher ConstrainDistanceY|Vertical distance]] |
||
| Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin. |
| Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin. |
||
|- |
|- |
||
| [[Image:Constraint_Length.png|32px]] [[ |
| [[Image:Constraint_Length.png|32px]] [[Sketcher ConstrainDistance|Distance]] |
||
| Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. |
| Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. |
||
| [[Image:Constraint_Radius.png|32px]] [[ |
| [[Image:Constraint_Radius.png|32px]] [[Sketcher ConstrainRadius|Radius]] |
||
| Defines the radius of a selected arc or circle by constraining the radius. |
| Defines the radius of a selected arc or circle by constraining the radius. |
||
|- |
|- |
||
| [[Image:Constraint_InternalAngle.png|32px]] [[ |
| [[Image:Constraint_InternalAngle.png|32px]] [[Sketcher ConstrainAngle|Internal anglr]] |
||
| Defines the internal angle between two selected lines. |
| Defines the internal angle between two selected lines. |
||
| [[Image:Constraint_SnellsLaw.png|32px]] [[ |
| [[Image:Constraint_SnellsLaw.png|32px]] [[Sketcher ConstrainSnellsLaw|Snell's law]] |
||
| Constrains two lines to obey a refraction law to simulate the light going through an interface |
| Constrains two lines to obey a refraction law to simulate the light going through an interface |
||
|- |
|- |
||
| [[Image:Constraint_InternalAlignment.png|32px]] [[ |
| [[Image:Constraint_InternalAlignment.png|32px]] [[Sketcher ConstrainInternalAlignment|Internal alignment]] |
||
| Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) |
| Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) |
||
| [[Image:Sketcher_MapSketch.png|32px]] [[Sketcher_MapSketch|Map sketch]] |
| [[Image:Sketcher_MapSketch.png|32px]] [[Sketcher_MapSketch|Map sketch]] |
Revision as of 07:47, 8 October 2018
Werkzeug | Beschreibung | Werkzeug | Beschreibung |
---|---|---|---|
Point | Zeichnen eine Punkts | Line | Zeichnen einer Linie, bestimmt von beiden Endpunkten |
Arc | Zeichnen eines Kreisbogens, bestimmt von Mittelpunkt, Radius und relativem Anfangs- und Endwinkel | Arc 3 points | Zeichnen eines Kreisbogens, bestimmt von 3 auf ihm liegenden Punkten
(2 der 3 Punkte sind die Endpunkte des Kreisbogens) |
Circle | Zeichnen eines Kreises, bestimmt von Mittelpunkt und Radius | Circle 3 points | Zeichnen eines Kreises, bestimmt von 3 auf ihm liegenden Punkten |
Ellipse | Zeichnen einer Ellipse, bestimmt von Mittelpunkt und je einem Endpunkt der beiden Ellipsenachsen | Ellipse 3 points | Zeichnen einer Ellipse, bestimmt von beiden Endpunkten der großen und einem Endpunkt der kleinen Ellipsenachse |
Arc of ellipse | Zeichnen eines elliptischen Bogens, bestimmt von Mittelpunkt, einem Endpunkt der großen Ellipsenachse und Anfangs- und Endpunkt | Polyline | Zeichnen eines aus mehreren geraden Linien bestehenden Linienzugs |
Rectangle | Zeichnen eines Rechtecks, bestimmt von zwei diagonal gegenüber liegenden Eckpunkten | Triangle | Zeichnen eines gleichseitigen Dreiecks, bestimmt vom Umkreis |
Square | Zeichnen eines gleichseitigen Dreiecks, bestimmt vom Innenkreis | Pentagon | Zeichnen eines gleichseitigen Vielecks, vom Umkreis bestimmt |
Hexagon | Zeichnen eines gleichseitigen Sechsecks, vom Umkreis bestimmt | Heptagon | Zeichnen eines gleichseitigen Siebenecks, vom Umkreis bestimmt |
Octagon | Zeichnen eines gleichseitigen Achtecks, vom Umkreis bestimmt | Slot | Zeichnen eines Ovals, vom Mittelpunkt, einem Halbkreis und dem äußersten Punkt des anderen Halbkreises bestimmt |
Fillet | Erzeugen einer Rundung an einer von zwei Linien gebildeten Ecke | Trimming | Kürzen einer Linie, eines Kreises oder eines Bogens mithilfe einer/s überlagernden Linie, Kreises oder Bogens |
External geometry | Creates an edge linked to external geometry | Construction mode | Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation and is only visible while editing the Sketch that contains it |
Point on point | Affixes a point onto (coincident with) one or more other points. | Point on object | Affixes a point onto another object such as a line, arc, or axis. |
Vertical | Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint. | Horizontal | Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint. |
Parallel | Constrains two or more lines parallel to one another. | Perpendicular | Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint. |
Tangent | Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. | Equal length | Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal. |
Symmetric | Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. | Lock | Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item |
Horizontal distance | Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. | Vertical distance | Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin. |
Distance | Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. | Radius | Defines the radius of a selected arc or circle by constraining the radius. |
Internal anglr | Defines the internal angle between two selected lines. | Snell's law | Constrains two lines to obey a refraction law to simulate the light going through an interface |
Internal alignment | Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) | Map sketch | Maps a sketch to the previously selected face of a solid |
Merge | Merge two or more sketches | Mirror | Mirrors selected elements of a sketch |