TechDraw Dimensión Vertical

From FreeCAD Documentation
Revision as of 12:54, 15 September 2021 by FuzzyBot (talk | contribs) (Part of translatable page "TechDraw Dimension Vertical")

!!FUZZY!!

!!FUZZY!!

TechDraw Dimensión Vertical

Ubicación en el Menú
TechDraw → Dimensión Horizontal
Entornos de trabajo
TechDraw
Atajo de teclado por defecto
Shift + V
Introducido en versión
-
Ver también
TechDraw Dimensión Longitud, /es|TechDraw Dimensión Horizontal

Descripción

The Dimension Vertical tool adds a vertical dimension to a View. The dimension may be between two vertices, the length of one edge or the vertical distance between 2 edges. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using the Link Dimension tool.

Length dimension taken from two arbitrary nodes of the view; the distance is measured vertically

Utilización

  1. Select the points or edge which define your measurement.
  2. Press the Dimension Vertical button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described in this page.

To change the properties of a dimension object either double-clicking it in the drawing or in the Tree view. This will open the dimension dialog.

Limitaciones

Dimension objects are vulnerable to "topological naming" issues. See the information in the TechDraw Dimension Length tool for more information.

Propiedades

This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.

Scripting

See also: TechDraw API and FreeCAD Scripting Basics.

The Dimension Vertical tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "DistanceX"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)


!!FUZZY!!