TechDraw Projection de forme
TechDraw ProjectShape |
Menu location |
---|
TechDraw → Project shape... |
Workbenches |
TechDraw |
Default shortcut |
None |
Introduced in version |
0.20 |
See also |
Draft Shape2DView |
Description
The TechDraw ProjectShape tool creates projections of shapes. The projections are created in the 3D view, and not on a TechDraw Page.
Usage
- Select one or more objects. For each object a separate projection will be created.
- There are several ways to invoke the tool:
- Press the Project shape... button.
- Select the TechDraw → Project shape... option from the menu.
- The Project shapes task panel opens. See Properties.
- Set the desired options.
- The selected options should not result in an empty projection as this will cause an error. For example, for an object with only sharp edges such as a Part Box, the Visible sharp edges and/or Hidden sharp edges option must be checked.
- Press the OK button.
Properties
A Projection object is derived from a Part Feature and inherits all its properties. It also has the following additional properties:
Data
Projection
- DonnéesSource (
Link
): The shape to project. - DonnéesDirection (
Vector
): The direction of the projection. This is the normal vector of the projection plane. - DonnéesVCompound (
Bool
): Iftrue
, visible sharp edges are shown. Example: all edges of a Part Box. - DonnéesRg1 Line VCompound (
Bool
): Iftrue
, visible smooth edges are shown. Example: the edges between a fillet and its adjoining faces. - DonnéesRg NLine VCompound (
Bool
): Iftrue
, visible sewn edges are shown. Example: the seam of a 360° cylindrical face. - DonnéesOut Line VCompound (
Bool
): Iftrue
, visible outline edges (that are not sharp) are shown. Example: the side view of a Part Cylinder has two such edges. - DonnéesIso Line VCompound (
Bool
): Iftrue
, visible isoparameters are shown. Does not work currently. - DonnéesHCompound (
Bool
): Iftrue
, hidden sharp edges are shown. - DonnéesRg1 Line HCompound (
Bool
): Iftrue
, hidden smooth edges are shown - DonnéesRg NLine HCompound (
Bool
): Iftrue
, hidden sewn edges are shown. - DonnéesOut Line HCompound (
Bool
): Iftrue
, hidden outline edges are shown. - DonnéesIso Line HCompound (
Bool
): Iftrue
, hidden isoparameters are shown. Does not work currently.
Notes
This tool was previously available in the Drawing Workbench.
TechDraw
- Pages : Page par défaut, Page à partir d'un modèle, Redessiner une page, Tout imprimer
- Vues : Vue, Vue active, Groupe de projections, Vue en coupe, Vue en coupe complexe, Vue détaillée, Vue d'un objet Draft, Vue d'un objet Arch, Vue d'un objet Spreadsheet, Fenêtre de rognage, Copier une vue, Projection de forme
- Empilement : Empiler en haut, Empiler en bas, Empiler vers le haut, Empiler vers le bas
- Décorations : Hachures par motif, Hachures géométriques, Symbole, Image, Bascule des cadres
- Cotes : Cote de longueur, Cote horizontale, Cote verticale, Cote de rayon, Cote de diamètre, Cote angulaire, Cote angulaire par 3 points, Cote étendue horizontale, Cote étendue verticale, Lier une cote, Infobulle, Cote axonométrique, Cote à partir des points du repère, Réparation des cotes
- Annotations : Annotation, Ligne de référence, Annotation texte enrichi, Point cosmétique, Points médians, Sommets quadrants, Ligne centrale à une face, Ligne centrale entre 2 lignes, Ligne centrale entre 2 points, Ligne cosmétique par 2 points, Cercle cosmétique, Apparence des lignes, Montrer tout, Soudure, Symbole d'état de surface, Tolérance de trou/d'arbre
- Extensions :
- Attributs et modifications : Sélection des attributs, Modification des attributs, Prolonger, Raccourcir, Verrouiller/déverrouiller, Position d'une vue en coupe, Aligner horizontalement, Aligner verticalement, Aligner obliquemement, Cascade horizontale, Cascade verticale, Cascade oblique, Calculer l'aire des faces sélectionnées, Calculer la longueur d'arc d'arêtes sélectionnées, Personnaliser le format d'infobulle
- Lignes centrales, filetage et taraudage : Axes de centrage, Axes de centrage de trous/vis, Corps de taraudage, Taraudage, Corps de filetage, Filetage, Intersection de lignes, Ajouter un sommet décalé, Cercle, Arc, Cercle par 3 points, Ligne parallèle, Ligne perpendiculaire
- Cotes : Cotes horizontales, Cotes verticales, Cotes obliques, Cotes parallèles horizontales, Cotes parallèles verticales, Cotes parallèles obliques, Cote horizontale chanfrein, Cote verticale chanfrein, Longueur d'arc, Diamètre '⌀', Section tube '〼', Supprimer les symboles, Plus de décimales, Moins de décimales
- Exportation : Exporter au format SVG, Exporter au format DXF
- Fonctions supplémentaires : Groupe de lignes, Modèles, Hachures, Dimensionnement géométrique et tolérance, Préférences
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test