Sketcher ToggleConstruction/cs: Difference between revisions
(Created page with "{{GuiCommand/cs|Name=Sketcher AlterConstruction|Name/cs= Změna konst.módu|Workbenches=Náčrt, Návrh dílu|MenuLocatio...") |
(Created page with "Konstrukční mód je důležitý nástroj Náčrtu. Při použití náčrtu ve 3D je konstrukční mód ignorován.") |
||
Line 4: | Line 4: | ||
Tento nástroj přehazuje náčrt konstrukce do a z konstrukčního módu. Může to být použito na jakýkoliv typ konstrukce: přímka, oblouk nebo kružnice. |
Tento nástroj přehazuje náčrt konstrukce do a z konstrukčního módu. Může to být použito na jakýkoliv typ konstrukce: přímka, oblouk nebo kružnice. |
||
Konstrukční mód je důležitý nástroj Náčrtu. Při použití náčrtu ve 3D je konstrukční mód ignorován. |
|||
Construction geometry is an important tool of the sketcher. When using a sketch for a 3D operation, construction geometry is ignored. |
|||
In sketch edit mode, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you exit the sketch mode, construction geometry is hidden on the screen. |
In sketch edit mode, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you exit the sketch mode, construction geometry is hidden on the screen. |
Revision as of 06:38, 13 March 2014
Změna konst.módu |
Umístění Menu |
---|
Náčrt → Náčrt Konstrukce → Změna konst.módu |
Pracovní stoly |
Náčrt, Návrh dílu |
Výchozí zástupce |
Nikdo |
Představen ve verzi |
- |
Viz také |
Nikdo |
Popis
Tento nástroj přehazuje náčrt konstrukce do a z konstrukčního módu. Může to být použito na jakýkoliv typ konstrukce: přímka, oblouk nebo kružnice.
Konstrukční mód je důležitý nástroj Náčrtu. Při použití náčrtu ve 3D je konstrukční mód ignorován.
In sketch edit mode, construction geometry is shown as blue, and won't turn green when a sketch is fully constrained. Once you exit the sketch mode, construction geometry is hidden on the screen.
Note: starting with v0.13, construction lines can be used as rotation axis by the PartDesign Revolve feature.
Usage
- Select one or more sketch geometry in the 3D view, then click on the tool or access it in the menu.