Sketcher CreatePoint/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "Lo strumento Punto crea un punto nello schizzo corrente, il punto può essere utilizzato per la costruzione di elementi geometrici. Il punto è sempre un elemento di costruz...")
Line 4: Line 4:
==Descrizione==
==Descrizione==


Lo strumento Punto crea un punto nello schizzo corrente, il punto può essere utilizzato per la costruzione di elementi geometrici.
The Point tool creates a point in the current sketch, which can be used for constructing geometry elements. The point is always an construction element and does not show up in the 3D-view.

Il punto è sempre un elemento di costruzione e non viene visualizzato nella vista 3D.


[[IMAGE:Sketcher_Point_fr_01.png|480px|Point in the sketcher]]
[[IMAGE:Sketcher_Point_fr_01.png|480px|Point in the sketcher]]

Revision as of 21:16, 3 November 2018

Punto

Posizione nel menu
Sketch → Geometrie → Punto
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Lo strumento Punto crea un punto nello schizzo corrente, il punto può essere utilizzato per la costruzione di elementi geometrici.

Il punto è sempre un elemento di costruzione e non viene visualizzato nella vista 3D.

Point in the sketcher

How to use

  • Click on the button Create point, to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Options

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Limitations

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.