Sketcher CreatePoint/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "L'outil Point crée un point dans l'esquisse en cours, qui peut être utilisé pour construire des éléments de géométrie. Le point est un élément de construction et n'ap...")
(Created page with "==Utilisation==")
Line 8: Line 8:
[[IMAGE:Sketcher_Point_fr_01.png|480px|Point in the sketcher]]
[[IMAGE:Sketcher_Point_fr_01.png|480px|Point in the sketcher]]
{{clear}}
{{clear}}
==How to use==
==Utilisation==


* Click on the button {{KEY|[[Image:Sketcher CreatePoint.png|24px]] Create point}}, to activate the function.
* Click on the button {{KEY|[[Image:Sketcher CreatePoint.png|24px]] Create point}}, to activate the function.

Revision as of 21:22, 3 November 2018

Point

Emplacement du menu
Sketch → Géométries d'esquisse → Créer un point
Ateliers
Sketcher
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

L'outil Point crée un point dans l'esquisse en cours, qui peut être utilisé pour construire des éléments de géométrie. Le point est un élément de construction et n'apparaîtra jamais dans la vue 3D.

Point in the sketcher

Utilisation

  • Click on the button Create point, to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Options

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Limitations

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.