SheetMetal Exemples

From FreeCAD Documentation
Revision as of 21:30, 24 September 2021 by David69 (talk | contribs) (Created page with "SheetMetal Exemples")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.

Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.

Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.
Other languages:

Introduction

The SheetMetal workbench has grown quite powerful now and it demands an appropriate documentation.

To avoid the overcrowding of the tool pages with examples this page was added to collect parts showing and explaining special SheetMetal features.

Planned phases to generate content:

  1. Collecting pictures
  2. Adding workflow descriptions
  3. Adding more detailed tutorials

Hinge



Workflow Hinge: Make Base Wall, PartDesign Pocket, PartDesign Hole, Unfold.

Paper Clip



Workflow Paper Clip: Make Base Wall, Sketch on Sheet, clone, flip and fuse, Unfold.

Too bad that there is a tool missing to mirror the whole object.
A link object could be mirrored, but when fused (boolean) unfold will fail.
To achieve an unfoldable part with both halves fused a clone or one of a pair of link objects has to be flipped (turned by 180°) instead of being mirrored.

Omega Clamp



Workflow Omega Clip: Make Base Wall, PartDesign Hole, PartDesign Fillet, Unfold.

Hex Bowl



Workflow Hex Bowl: Make Base Wall, Make Wall, 6x Add Corner Relief, Unfold.

When a Corner Relief is added (right side) it can be necessary to adjust the value of the Size property.

Pen Clip



Workflow Pen Clip: Make Base Wall, PartDesign Pocket, 3x Make Wall, Unfold.

Extend Face Example



Workflow Extend Face Example: Make Base Wall, Make Wall, Extend Face, Extend Face, Unfold.

For the second use of Extend Face a Sketch with two contours is used for shape of the extension(s); and with the value of "use subtraction" set to true it provides the shape for the cut-outs, as well

USB shield contact



Workflow USB shield contact: Make Base Wall, Extend Face, PartDesign Pocket, Extend Face, Make Wall, Unfold.

(The pull relief is just an artistic expression of what could be hidden inside a real plug)