SheetMetal Examples

From FreeCAD Documentation
Revision as of 18:21, 21 September 2021 by Roy 043 (talk | contribs) (Marked this version for translation)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

Introduction

The SheetMetal workbench has grown quite powerful now and it demands an appropriate documentation.

To avoid the overcrowding of the tool pages with examples this page was added to collect parts showing and explaining special SheetMetal features.

Planned phases to generate content:

  1. Collecting pictures
  2. Adding workflow descriptions
  3. Adding more detailed tutorials

Hinge



Workflow Hinge: Make Base Wall, PartDesign Pocket, PartDesign Hole, Unfold.

Paper Clip



Workflow Paper Clip: Make Base Wall, Sketch on Sheet, clone, flip and fuse, Unfold.

Too bad that there is a tool missing to mirror the whole object.
A link object could be mirrored, but when fused (boolean) unfold will fail.
To achieve an unfoldable part with both halves fused a clone or one of a pair of link objects has to be flipped (turned by 180°) instead of being mirrored.

Omega Clamp



Workflow Omega Clip: Make Base Wall, PartDesign Hole, PartDesign Fillet, Unfold.

Hex Bowl



Workflow Hex Bowl: Make Base Wall, Make Wall, 6x Add Corner Relief, Unfold.

When a Corner Relief is added (right side) it can be necessary to adjust the value of the Size property.

Pen Clip



Workflow Pen Clip: Make Base Wall, PartDesign Pocket, 3x Make Wall, Unfold.

Extend Face Example



Workflow Extend Face Example: Make Base Wall, Make Wall, Extend Face, Extend Face, Unfold.

For the second use of Extend Face a Sketch with two contours is used for shape of the extension(s); and with the value of "use subtraction" set to true it provides the shape for the cut-outs, as well

USB shield contact



Workflow USB shield contact: Make Base Wall, Extend Face, PartDesign Pocket, Extend Face, Make Wall, Unfold.

(The pull relief is just an artistic expression of what could be hidden inside a real plug)