Примечания к выпуску 013

From FreeCAD Documentation
Revision as of 20:49, 16 April 2014 by Renatorivo (talk | contribs) (Created page with "* '''Улучшение ограничений ''': Когда вы вводите точку в рехмерном пространстве, по мимо существую...")

Это обзор самых интересных изменений произошедших в последней версии FreeCAD. Смотри полный список для получения подробной информации об изменениях.

Предыдущие версии: 0.12 - 0.11

modeled in FreeCAD by psicofil


Основное

  • Настройки цветов: Вам надоели старые добрые серые формы с черными контурами установленные в FreeCAD по умолчанию? Теперь вы можете менять пользовательские предпочтения в настройках (Отобразить -> Цвета), вместе с другими настройками цветов по умолчанию.

Модуль создания проекций

  • Функция обрезки: Новый инструмент Обрезка изображения позволяет разместить проекции объектов внутри невидимого прямоугольника который обрежет границы изображения.
  • Редактируемый штамп чертежа: При проектировании Чертежных Шаблонов, теперь можно отметить текст который будет редактируемым. Этот текст будет редактироваться напрямую в FreeCAD.
  • Функция аннотации: Новая функция Аннотация , простой инструмент для размещения блока текста на чертеже.

Sketcher module

  • Point Creation

Points can now be added and used as a feature within a sketch

  • Sketch Origin

User can now use the sketch's origin to define geometry as well as the sketch axes.

  • Tangency and perpendicularity constraints for arcs and circles.
  • Constraints with respect to external (projected) geometry.
  • Improved counting of the sketch degrees of freedom.
  • Symmetry constraint with respect to a symmetry point (midpoint constraint).
  • Improved Datum Label and Constraint Visuals:

    • Each constraint label (including arrows) will correctly scale to the size of the scene automatically to the 3D viewport
    • Datum label text for Distance, Distance X, Distance Y and Radius can be freely positioned now with greater control.
    • Small improvements to overlapping constraint icons and fix freezes.
    • Datum Label text will reverse when the view is orientated from the opposite side.


  • Fully constrained Sketches are now highlighted:

The sketch color turns from white to green to indicate it is fully constrained. These default colors can be customized.


  • Rubber band selection:

Geometry (Points, Lines and Curves) may be selected by dragging on the background to create a rectangular selection.

  • Extended functionality of the polyline tool: using the m key one can switch between arc and line mode and among free, tangent and perpendicular transitions from the previous segment.
  • Map sketch to face is a new tool to map (or remap) an existing sketch to the selected face on a solid. This allows the use of this sketch for features such as Pad and Pocket.
  • Small Improvements:
    • When constructing geometry, tool tip with related information is shown next to cursor.
    • Sketch view which sets the 3D view perpendicular to the sketch plane has now an icon in the Sketcher toolbar.

Чертежный модуль

  • Режим задач: Режим просмотра задач(Taskview) теперь по умолчанию установлен в Чертежном модуле. Не бойтесь, если вам больше нравится панель инструментовона по прежнему доступна в параметрах Чертежных настроек.
  • Импорт из DXF: Импортировщик из DXF теперь поддерживает точки (преобразуя их Точки Чертежного модуля) и пунктир (преобразует в Ломаную Кривую)
  • Совершенно новая система привязок: Система привязок Чертежно модуля, полностью переписана с нуля. Теперь её гораздо проще расширять и использовать во внешних сценариях и модулях, также появились новые изображения обозначающие привязки , а также панель инструментов с ними, где вы можете вкл/выкл каждую привязку индивидуально или отключить всю систему привязок.

  • Улучшение ограничений : Когда вы вводите точку в рехмерном пространстве, по мимо существующего ограничения при зажатой клавише Shift, теперь вы можете перемещаться только в X, Y или Z направлении нажав клавиши X, Y или Z соответственно. Повторное нажатие, отключит ограничение.
  • Преобразование Чертеж <-> Эскиз: Теперь Чертежный модуль обладает новым инструментом для конверсии Draft2Sketch , он позволяет преобразовать выбранные Чертежные объекты (или любую плоскую форму) в Эскизы , а также это работает наоборот.
  • Инструмент для создания клонов: Создает копиии выбранного объекта с привязкой к оригиналу. Когда оригинал измениться, клоны обновяться автоматически. Объект клон можно переместить, повернуть, а также у него есть свойство масштаба, что позволяет вам менять размер копий.
  • Импорт из SVG: Теперь инструмент импорта из SVG лучше поддерживает кривые Безье.
  • Скругленные углы: Некоторые Чертежные объекты, как (Ломаные, Прямоугольник и Многоугольники) теперь обладают свойством Радиус скругления , скругляет их углы по указанному значению радиуса.

  • 2D view object: The new Shape2DView tool allows to quickly place a 2D view of a selected object in the document. You can specify the projection vector.

Arch module

  • Draft integration: The Arch and Draft modules are now tightly integrated. The Arch tools use the Draft snapping system, and all the Draft tools are present in the Arch workbench. In fact, if you like, you can now completely switch off the Draft module (Preferences -> Draft -> Hide the Draft workbench)
  • New wall tool: The wall tool has been greatly enhanced, and now features a direct drawing mode, that is activated when you press the Wall button with no object selected, that allows you to draw walls like you draw simple lines. In additions, walls now auto-connect when you snap to an existing wall.

  • New roof tool: A new roof tool is now available in the Arch module, that allows you to quickly create sloped roofs from a selected face.
  • New window tool: Windows are now created directly on top of a flat shape that contains one or more wires, such as a rectangle or a sketch. If that shape was drawn directly on a wall face, the window will automatically cut an opening in the wall.
  • New sections system: It is now very simple to create 2D plans, sections and elevations from your model: Place a Section Plane object, orient it the way you want, edit it to include the objects it must see, and you are done!
  • New solid renderer: In addition to the OpenCasCADe-based wireframe 2D renderer currently used by the Drawing Module, the Arch module now features a new 2D renderer, that is able to render filled faces to a SVG Drawing sheet, giving much nicer 2D views.

  • IFC import with IfcOpenShell: The Arch module can now use IfcOpenShell if it is installed on your system. This allows for much more powerful IFC import, and all the contents of the IFC file are guaranteed to be imported.
  • New floor and building objects: Building and floors are now groups, so you can add and remove objects from them with a simple drag&drop from the tree view.
  • New axes system: A new axes system feature has been added, that allows to quickly layout complex axes systems. These axes can then be added to Structure objects, so they spread automatically on the grid nodes.

  • Arch objects from meshes: Walls and structures can now be made directly from a mesh, provided it is closed, solid and all edges are manifold. This allows for very quick transformation of geometry imported from other applications such as blender into valid Arch objects.

Part module

  • Refine shape is a new utility that cleans up faces after a few operations on a shape. It can be set to run automatically after boolean operations in the Preferences.
  • New Loft tool can extrude a complex set of surfaces or a solid shape through a series of sketches or Draft objects.
  • New Sweep tool can extrude a complex set of surfaces or a solid shape through a series of sketches or Draft objects and a trajectory (sketch, edge or Draft object).
  • New Offset tool can offset a single surface or a shape.
  • New Thickness tool can hollow out a solid shape by setting a wall thickness and opening one or more faces.
  • Shape Builder and Create primitives are now in the Part toolbar for quick access.

Part Design module

  • Pad and Pocket are now more powerful thanks to more parameters, such as extrude to first/to last, up to face, 2 dimensions, symmetric to plane.
  • Chamfer and Fillet got an upgrade: selecting a face is now allowed, all the outer and inner edges of this face will be processed.
  • Revolution: a construction line can now be used as a revolution axis.
  • New Groove tool: cut matter from your solid by revolving a sketch.
  • Linear pattern, Mirrored, Polar pattern and Multipattern tools, that allow you to align and distribute pads and pockets on a feature.
  • A Shaft Wizard to help you design shaft objects

Ship Design module

3D mice

  • Support for 3D mice (Spaceball, Space Navigator) has been added to the Windows version.
  • A new Spaceball Motion tab in the Customize dialog allows for fine tuning your 3D mouse to the settings you want, directly from FreeCAD.

OpenSCAD module

  • This brand new (experimental) module brings OpenSCAD files import capability into FreeCAD. This file format is wildly popular in the RepRap community and on digital designs sharing site Thingiverse.
  • OpenSCAD script can be executed from within FreeCAD, by OpenSCAD (if installed on your computer), with the result appearing in your FreeCAD document.
  • For more information see the OpenSCAD Module page on the FreeCAD wiki