Points Workbench/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "Aceste scule și instrumente sunt deja disponibile:")
Line 1: Line 1:
Panoul "Puncte" a fost creat ca să vă ofere unelte specifice pentru lucrul cu [http://en.wikipedia.org/wiki/Point_cloud point clouds]. Se află în dezvoltare.
Panoul "Puncte" a fost creat ca să vă ofere unelte specifice pentru lucrul cu [http://en.wikipedia.org/wiki/Point_cloud point clouds]. Se află în dezvoltare.


Aceste scule și instrumente sunt deja disponibile:
These tools are already available:


* [[Image:Points_Import_Point_cloud.svg|32px]] [[Points ImportPoints|Import Point Cloud]]: will import coordinates for 3D-points from a text file
* [[Image:Points_Import_Point_cloud.svg|32px]] [[Points ImportPoints|Import Point Cloud]]: will import coordinates for 3D-points from a text file

Revision as of 09:06, 5 August 2018

Panoul "Puncte" a fost creat ca să vă ofere unelte specifice pentru lucrul cu point clouds. Se află în dezvoltare.

Aceste scule și instrumente sunt deja disponibile:

At the moment, the points cloud workbench has no automatic routines to deal with the imported points.
But linking against the points cloud library (the windows version of FreeCAD already has that capability) you could
use python commands to further process your data, see discusion here and here (german sub-form).
Another interesting discussion here (english Help-Forum).

Of course you could also use the draft workbench within FreeCAD and connect the points using draft elements.
Using snap-mode "end-point" will ensure snapping to the points.