Part Kugel

From FreeCAD Documentation
Revision as of 18:21, 3 January 2018 by Holdi (talk | contribs) (Created page with "== Zusammenfassung == Erstellt wird eine parametrisierte Kugel: Parameter sind der Durchmesser und 3 bestimmte Winkel (bei deren beliebiger Größe liegt ein Teil einer Kugel...")

Part Sphere

Menüeintrag
Part -> Sphere
Arbeitsbereich
Part Module,Complete
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Part CreatePrimitives

Zusammenfassung

Erstellt wird eine parametrisierte Kugel: Parameter sind der Durchmesser und 3 bestimmte Winkel (bei deren beliebiger Größe liegt ein Teil einer Kugel vor).

How to use

In the workbench Part click on the sphere icon . The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).

Options

The parametric sphere is defined by the following parameters:

  • Radius
  • Angle 1
  • Angle 2
  • Angle 3
  • as well as the standard set of placement parameters

The picture below gives an overview of a parametric sphere with parameters different from the default value.

Parameter

  • Radius: Radius of the sphere
  • Angle 1: 1nd angle to cut / define the sphere
  • Angle 2: 2nd angle to cut / define the sphere
  • Angle 3: 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.