Part Cylinder/sv: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/sv|Name=Part_Cylinder|Workbenches=Del,Komplett}}")
(Created page with "Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.")
Line 2: Line 2:




Creates a simple parametric cylinder, with position, angle, radius and height parameters.
Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.


The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Revision as of 19:45, 20 February 2014

Part_Cylinder

Menyplacering
Ingen
Arbetsbänkar
Del,Komplett
Standard genväg
Ingen
Introducerad i version
-
Se även
Ingen


Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.

The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

The properties can later be edited in the data tab for the cylinder:

The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).

The height is the distance in the z-axis.

The radius defines a plane in x-y.

a cylinder created with the Cylinder tool