Part Cylinder/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/ro|Name=Part_Cylinder|Name/ro=Part Cylinder|MenuLocation=Part -> Cylinder||Workbenches=Part Module,Complete|SeeAlso=[[Part_CreatePrimitives/ro|...")
(Updating to match new version of source page)
Line 1: Line 1:
{{GuiCommand/ro|Name=Part_Cylinder|Name/ro=Part Cylinder|MenuLocation=Part -> Cylinder||Workbenches=[[Part_Module/ro|Part Module]],Complete|SeeAlso=[[Part_CreatePrimitives/ro|Part CreatePrimitives]]}}
{{GuiCommand/ro|Name=Part_Cylinder|Name/ro=Part Cylinder|MenuLocation=Part -> Cylinder||Workbenches=[[Part_Module/ro|Part Module]],Complete|SeeAlso=[[Part_CreatePrimitives/ro|Part CreatePrimitives]]}}


== Description ==

Creates a simple parametric cylinder, with position, angle, radius and height parameters.
Creates a simple parametric cylinder, with position, angle, radius and height parameters.


== How to use ==
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
In the workbench [[Part_Workbench|Part]] click on the cube icon [[Image:Part_Cylinder.png|32px]]. The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.


== Options ==
The properties can later be edited in the data tab for the cylinder:
The properties can later be edited in the data tab for the cylinder:


[[File:cylinder.png|650px|a cylinder created with the Cylinder tool]]
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).


==== Cylinder====
The height is the distance in the z-axis.
* {{Parameter|Angle:}} The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)

* {{Parameter|Height:}} The height is the distance in the z-axis
The radius defines a plane in x-y.
* {{Parameter|Radius:}} The radius defines a plane in x-y.

[[File:cylinder.png|650px|a cylinder created with the Cylinder tool]]





Revision as of 09:45, 19 June 2014

Part Cylinder

poziția meniului
Part -> Cylinder
Ateliere
Part Module,Complete
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
Part CreatePrimitives

Description

Creates a simple parametric cylinder, with position, angle, radius and height parameters.

How to use

In the workbench Part click on the cube icon . The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Options

The properties can later be edited in the data tab for the cylinder:

a cylinder created with the Cylinder tool

Cylinder

  • Angle: The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
  • Height: The height is the distance in the z-axis
  • Radius: The radius defines a plane in x-y.