Part Cylinder/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 13: Line 13:
[[File:cylinder.png|650px|a cylinder created with the Cylinder tool]]
[[File:cylinder.png|650px|a cylinder created with the Cylinder tool]]


==== Cylinder====
==== Cilindru====
* {{Parameter|Angle:}} The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
* {{Parameter|Angle:}} The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
* {{Parameter|Height:}} The height is the distance in the z-axis
* {{Parameter|Height:}} The height is the distance in the z-axis

Revision as of 16:36, 26 October 2018

Part Cylinder

poziția meniului
Part -> Cylinder
Ateliere
Part Module,Complete
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
Part CreatePrimitives

Descriere

Creează un simplu cilindru parametric, cu parametrii de poziție, unghi, rază și înălțime.

Cum se folosește

În bara de lucru Atelierului Part faceți clic pe pictograma cilindrului . Valoarea prestabilită este pentru poziționarea unui cilindru complet, centrul unei fețe circulare care coincide cu originea globală (punctul 0,0,0), cu o rază de 2 mm și o înălțime de 10 mm.

Opțiuni

Proprietățile pot fi ulterior editate în fila de date pentru cilindru:

a cylinder created with the Cylinder tool

Cilindru

  • Angle: The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
  • Height: The height is the distance in the z-axis
  • Radius: The radius defines a plane in x-y.