Part Cylinder/es: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/es|Name=Part_Cylinder|Workbenches=Pieza,Completo}}")
(Created page with "Crea un cilindro paramétrico simple, con los parámetros de posición, ángulo, radio y altura.")
Line 2: Line 2:




Crea un cilindro paramétrico simple, con los parámetros de posición, ángulo, radio y altura.
Creates a simple parametric cylinder, with position, angle, radius and height parameters.


The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Revision as of 17:46, 20 February 2014

Part_Cylinder

Ubicación en el Menú
Ninguno
Entornos de trabajo
Pieza,Completo
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno


Crea un cilindro paramétrico simple, con los parámetros de posición, ángulo, radio y altura.

The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

The properties can later be edited in the data tab for the cylinder:

The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).

The height is the distance in the z-axis.

The radius defines a plane in x-y.

a cylinder created with the Cylinder tool