Part Cylinder/cs: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 1: Line 1:
{{GuiCommand/cs|Name=Part_Cylinder|Name/cs=Díl Válec|MenuLocation=Díl -> Válec||Workbenches=[[Part_Module/cs|Modul Díl]], Kompletace|SeeAlso=[[Part_CreatePrimitives/cs|Díl Vytváření zakl.geom.tvarů]]}}
{{GuiCommand/cs|Name=Part_Cylinder|Name/cs=Díl Válec|MenuLocation=Díl -> Válec||Workbenches=[[Part_Module/cs|Modul Díl]], Kompletace|SeeAlso=[[Part_CreatePrimitives/cs|Díl Vytváření zakl.geom.tvarů]]}}


== Description ==
Creates a simple parametric cylinder, with position, angle, radius and height parameters.


== How to use ==
Vytvoří jednoduchý válec podle parametrů pozice, úhel, poloměr a výška.
In the workbench [[Part_Workbench|Part]] click on the cube icon [[Image:Part_Cylinder.png|32px]]. The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.


== Options ==
Defaultní nastavení je tak, že pozice středu kruhu je shodná s počátkem souřadnicového systému (bod 0,0,0), poloměr 2mm a výška 10mm.
The properties can later be edited in the data tab for the cylinder:


[[File:cylinder.png|650px|válec vytvořený nástrojem Válec]]
V datové záložce válce mohou být později upravovány vlastnosti:


==== Cylinder====
Parametr úhel dovoluje vytvořit částečný válec (defaultně je úhel nastaven na 360°).
* {{Parameter|Angle:}} The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)

* {{Parameter|Height:}} The height is the distance in the z-axis
Výška je rozměr na ose Z.
* {{Parameter|Radius:}} The radius defines a plane in x-y.

Poloměr je definován v rovině XY.

[[File:cylinder.png|650px|válec vytvořený nástrojem Válec]]





Revision as of 09:45, 19 June 2014

Díl Válec

Umístění Menu
Díl -> Válec
Pracovní stoly
Modul Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Vytváření zakl.geom.tvarů

Description

Creates a simple parametric cylinder, with position, angle, radius and height parameters.

How to use

In the workbench Part click on the cube icon . The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Options

The properties can later be edited in the data tab for the cylinder:

válec vytvořený nástrojem Válec

Cylinder

  • Angle: The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
  • Height: The height is the distance in the z-axis
  • Radius: The radius defines a plane in x-y.