Part Cylinder/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/cs|Name=Part_Cylinder|Name/cs=Díl Válec|MenuLocation=Díl -> Válec||Workbenches=Modul Díl,Kompletace|SeeAlso=[[Part_CreateP...")
(Created page with "Vytvoří jednoduchý válec podle parametrů pozice, úhel, poloměr a výška.")
Line 2: Line 2:




Vytvoří jednoduchý válec podle parametrů pozice, úhel, poloměr a výška.
Creates a simple parametric cylinder, with position, angle, radius and height parameters.


The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Revision as of 17:54, 6 March 2014

Díl Válec

Umístění Menu
Díl -> Válec
Pracovní stoly
Modul Díl,Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Vytváření zakl.geom.tvarů


Vytvoří jednoduchý válec podle parametrů pozice, úhel, poloměr a výška.

The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

The properties can later be edited in the data tab for the cylinder:

The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).

The height is the distance in the z-axis.

The radius defines a plane in x-y.

a cylinder created with the Cylinder tool