Part CrossSections/hr: Difference between revisions
(Created page with "==Primjer==") |
(Created page with "==Opis==") |
||
Line 6: | Line 6: | ||
}} |
}} |
||
== |
==Opis== |
||
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape. |
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape. |
Revision as of 20:10, 29 May 2018
Part SectionCross |
Menu location |
---|
Part → Cross-sections... |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Section |
Opis
The Cross-sections utility creates one or more cross-sections through the selected shape.
Kako koristiti
- Select a shape.
- Press the Cross-sections button.
- Define the guiding plane.
- Define the position (height of the cross-section).
- Optionally, check Sections to create more than one cross-section:
- Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
- Set the count.
- Press OK.
Limitations
- The resulting object is not parametric, that is it is not linked to the original shape.
- A single object is created, even with more than one cross-section.