Part CrossSections/hr: Difference between revisions

From FreeCAD Documentation
(Created page with "=== Kako koristiti ===")
 
(Created page with "==Primjer==")
Line 26: Line 26:
* A single object is created, even with more than one cross-section.
* A single object is created, even with more than one cross-section.


==Example==
==Primjer==


[[Image:SectionCross1.png|Select an object]]
[[Image:SectionCross1.png|Select an object]]

Revision as of 20:10, 29 May 2018

Part SectionCross

Menu location
Part → Cross-sections...
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Section

Description

The Cross-sections utility creates one or more cross-sections through the selected shape.

Kako koristiti

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Primjer

Select an object

Dialog window

Result