PartDesign SubtractiveWedge/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "== Opţiuni ==")
(Created page with "==Proprietăți==")
Line 24: Line 24:
* Via the [[Property editor]].
* Via the [[Property editor]].


==Properties==
==Proprietăți==


Using the default placement, the below inputs are:
Using the default placement, the below inputs are:

Revision as of 10:49, 28 September 2018

PartDesign SubtractiveWedge

Menu location
Part Design → Create a subtractive primitive → Subtractive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveSubtractive

Descriere

Inserts a subtractive wedge in the active Body. Its shape is subtracted from the existing solid.

introduced in version 0.17

On the left: active body (A) shown in grey and subtractive wedge (B) shown in transparent red; result on the right.

Cum se folosește

  1. Press the Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Wedge feature appears under the active Body.

Opţiuni

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Proprietăți

Using the default placement, the below inputs are:

  • DateX min/max : Base face X axis span
  • DateY min/max: Wedge height span
  • DateZ min/max : Base face Z axis span
  • DateX2 min/max : Top face X axis span
  • DateZ2 min/max : Top face Z axis span