PartDesign Elipsoide Sustractivo

From FreeCAD Documentation
Revision as of 15:58, 31 May 2021 by Stylishcp (talk | contribs) (Created page with "==Opciones==")

PartDesign Elipsoide Sustractivo

Ubicación en el Menú
Part Design → Crear una primitiva sustractiva → Elipsoide sustractivo
Entornos de trabajo
PartDesign
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.17
Ver también
Ninguno

Descripción

Inserta un Elipsoide sustractivo en el Body (cuerpo) activo. Su forma es sustraída del sólido existente.

A la izquierda: Body activo (A) mostrado en color gris y el Elipsoide sustractivo (B) mostrado en color rojo transparente. El resultado se puede apreciar a la derecha.

Uso

  1. Presionar el botón Elipsoide Sustractivo . Nota: El Elipsoide sustractivo forma parte de un icono de herramientas llamado Crear una primitiva sustractiva. Tras abrir FreeCAD, la Caja sustractiva es la única mostrada en la barra de herramientas. Para obtener el Elipsoide, pinchar en la flecha que indica hacia abajo que está al lado del icono visible y seleccionar Elipsoide sustractivo en el menú desplegable.
  2. Seleccionar los parámetros de la primitiva y el Attachment.
  3. Aceptar OK.
  4. Una operación de Elipsoide aparece dentro del Body(cuerpo) activo.

Opciones

The Ellipsoid can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatosAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatosLabel: label given to the Ellipsoid object. Change to suit your needs.
  • DatosRadius1: the radius value along the ellipsoid's vertical axis; by default, parallel to the Z-axis.
  • DatosRadius2: the radius value along the ellipsoid's length; by default, parallel to the X-axis.
  • DatosRadius3: the radius value along the ellipsoid's width; by default, parallel to the Y-axis. At the default value of zero, the ellipsoid forms an oblate spheroid.
  • DatosAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the ellipsoid, parallel to the circular cross section (-90 degrees in a full spheroid)
  • DatosAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full spheroid).
  • DatosAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the elliptical cross section (360 degrees in a full spheroid).