PartDesign Caja Sustractiva

From FreeCAD Documentation
Revision as of 18:16, 29 May 2021 by Stylishcp (talk | contribs) (Created page with "==Uso==")

PartDesign Caja Sustractiva

Ubicación en el Menú
Part Design → Crear una primitiva sustractiva → Caja sustractiva
Entornos de trabajo
PartDesign
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.17
Ver también
PartDesign CompPrimitiveSubtractive

Descripción

Inserta una Caja sustractiva en el Body (cuerpo) activo. Su forma es sustraída del sólido existente.

A la izquierda: Body activo (A) mostrado en color gris y la Caja sustractiva (B) mostrada en color rojo transparente. El resultado se aprecia a la derecha.

Uso

  1. Press the Subtractive Box button. Note: the Subtractive Box is part of an icon menu labelled Create a subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Subtractive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatosAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatosLabel: Label given to the Box object. Change to suit your needs.
  • DatosLength: the Box's dimension in the X-direction.
  • DatosWidth: the Box's dimension in the Y-direction.
  • DatosHeight: the Box's dimension in the Z-direction.