PartDesign PolarPattern/de: Difference between revisions

From FreeCAD Documentation
(Created page with "== Einleitung == 'Polares Muster von Formelementen(Features) erstellen' - Dieses Werkzeug verwendet ein ausgewähltes Formelemente und erstellt daraus eine Reihe von (durch ei...")
(Created page with "== Optionen == Beim Erstellen eines Polaren Form-Musters bietet der Dialog "Polardiagramm-Parameter" zwei verschiedene Möglichkeiten zum Festlegen der Pattern-Rotationsachse.")
Line 6: Line 6:
Beispielsweise:
Beispielsweise:


==Options==
== Optionen ==
Beim Erstellen eines Polaren Form-Musters bietet der Dialog "Polardiagramm-Parameter" zwei verschiedene Möglichkeiten zum Festlegen der Pattern-Rotationsachse.
When creating a polar pattern feature, the 'polar pattern parameters' dialogue offers two different ways of specifying the pattern rotation axis.


===Normal sketch axis===
===Normal sketch axis===

Revision as of 10:39, 20 March 2018

PartDesign PolarPattern

Menüeintrag
PartDesign -> Polares Muster
Arbeitsbereich
PartDesign, Complete
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Einleitung

'Polares Muster von Formelementen(Features) erstellen' - Dieses Werkzeug verwendet ein ausgewähltes Formelemente und erstellt daraus eine Reihe von (durch eine ausgewählte Achse) gedrehten Kopien.
Das resultierende Objekt wird als neues separates Objekt in der Baumansicht erstellt.
Beispielsweise:

Optionen

Beim Erstellen eines Polaren Form-Musters bietet der Dialog "Polardiagramm-Parameter" zwei verschiedene Möglichkeiten zum Festlegen der Pattern-Rotationsachse.

Normal sketch axis

An axis being normal to the sketch and starting in the origin of the sketch of the feature being used is taken as axis for the polar pattern.
The pattern direction can be reversed by ticking 'Reverse direction'.

Select reference

Here you can select an edge as a reference.
If that option is chosen only the edge of a feature being used just before the polar pattern-operation is choosable. So you are able to use this option by:

  • creating a helper feature (for example a pad) with on of the edges being the axis of the polar pattern
  • create feature (pad or pocket) to be patterned
  • select polar pattern feature and select edge as reference
  • use another helper feature (for example pocket) to remove your first helper feature.

The pattern direction can be reversed by ticking 'Reverse direction'.


Angle and Occurrences

Specifies the angle to be covered by the pattern, and the total number of pattern shapes (including the original feature). For example, four occurrences in an angle of 180 degrees would give a spacing of 60 degrees between patterns. There is one exception: If the angle is 360 degrees, since first and last occurrence are identical, four occurrences will be spaced 90 degrees apart.

Limitations

Examples