PartDesign Déplacer après un autre objet

From FreeCAD Documentation
Revision as of 22:36, 24 March 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Template:GuiCommandNoIcon/fr

Description

Déplacer après un autre objet, comme cette commande est étiquetée dans le menu contextuel, permet de réorganiser les objets sous un Corps. Les esquisses, la géométrie de référence et les fonctionnalités sont prises en charge.

introduit dans la version 0.17

Comment l'utiliser

  1. Dans l'arborescence du modèle, cliquer avec le bouton droit sur l'objet à déplacer.
  2. Sélectionner Déplacer l'objet après un autre objet.
  3. Dans la boîte de dialogue Sélectionner la fonction, sélectionner l'objet sous lequel déplacer l'objet.
  4. Appuyez sur OK.

Example

The following three pictures show the same model with a pocket defined on a sketch attached to the datum plane. The features are reordered from one picture to the other. This has the effect that the pocket makes either no hole or make holes in different pads, depending on the order of the features in the model tree.