PartDesign MoveFeatureInTree: Difference between revisions

From FreeCAD Documentation
(Created page and made ready for translation.)
 
(Example with pictures added)
Line 19: Line 19:
# Press {{KEY|OK}}.
# Press {{KEY|OK}}.


==Example==
The following three pictures show the same model with a pocket defined on a sketch attached to the datum plane. The features are reordered from one picture to the other. This has the effect that the pocket makes either no hole or make holes in different pads, depending on the order of the features in the model tree.

</translate>
[[File:PD_move_feature0.png|none]]
[[File:Hole_Pad002.png|none]]
[[File:PD_move_feature2.png|none]]
<translate>


</translate>
</translate>

Revision as of 21:30, 24 March 2018

Template:GuiCommandNoIcon

Description

Move object after other object, as this command is labeled in the contextual menu, allows reordering of objects under a Body. Sketches, datum geometry and features are supported.

introduced in version 0.17

How to use

  1. In the Model tree, right-click on the object to be moved.
  2. Select Move object after other object.
  3. In the Select feature dialog, select the object under which to move the object.
  4. Press OK.

Example

The following three pictures show the same model with a pocket defined on a sketch attached to the datum plane. The features are reordered from one picture to the other. This has the effect that the pocket makes either no hole or make holes in different pads, depending on the order of the features in the model tree.